Crankshaft
Show/hide table
Illustration 1 | g03830699 |
Show/hide table
Specification for 463-5342 Crankshaft | |||
---|---|---|---|
Item | Qty | Part | Specification Description |
- | - | Before assembly, lubricate the main bearing journals and the thrust plates with clean engine oil. | |
1 | 2 | 7C-6209 Thrust Plate | Thrust plates should be used only on center main bearing. |
2 | 6 | 2W-2288 Plug | Torque to |
3 | 24 | 7N-2003 Dowel | Protrusion (C) of the dowel is |
4 | 36 | 128-4845 Bolt As | Use the following procedure in order to tighten the bolts:
1. Before assembly, lubricate the bolt threads, the bolt shank, the washer, and the underside of the bolt head with Molylube lubricant. 2. Tighten the bolts to 3. Turn each bolt for an additional turn of 120 ± 5 degrees. |
- | - | After assembly into cylinder block, end play of the crankshaft is |
Caterpillar Information System:
C2.2 Engines For Caterpillar Built Machines Valve Lash Is Excessive
C2.2 Engines For Caterpillar Built Machines Power Is Intermittently Low or Power Cutout Is Intermittent
3512C and 3516C Industrial Engines Flywheel Housing Cover
C2.2 Engines For Caterpillar Built Machines Oil Pressure Is Low
C2.2 Engines For Caterpillar Built Machines Oil Contains Coolant
C2.2 Engines For Caterpillar Built Machines Oil Consumption Is Excessive
3512C and 3516C Industrial Engines Engine Oil Pan
2015/05/15 New Software Is Used on Certain C32 Marine Engines {1920}
3516C High Displacement Engine Oil Pressure Is Low
SCR Retrofit Aftertreatment Maintenance Interval Schedule
3500 Generator Sets Maintenance Interval Schedule - Standby
3500 Generator Sets Maintenance Interval Schedule - Prime
C9.3 Marine Auxiliary and Generator Set Engine ECM - Replace
C9.3 Marine Engine Exhaust Manifold - Remove and Install - HEX Cooled or Separate Circuit Keel Cooled Hose Connections - Right-Hand Duplex Fuel
3512B Engine Maintenance Recommendations
G3304B and G3306B Engines Spark Plugs - Remove and Install
G3304B and G3306B Engines Spark Plug Adapter - Remove and Install
G3304B and G3306B Engines Exhaust Manifold - Remove
G3304B and G3306B Engines Exhaust Manifold - Install
C7 and C9 Industrial Engines Diagnostic Trouble Code Cross Reference
C7 and C9 Industrial Engines Diagnostic Trouble Codes
Procedure to Upgrade EMCP 1, EMCP 2, EMCP 2+, EMCP 3.1, EMCP 3.2, and EMCP 3.3 to EMCP 4.2 {4490, 7451} Procedure to Upgrade EMCP 1, EMCP 2, EMCP 2+, EMCP 3.1, EMCP 3.2, and EMCP 3.3 to EMCP 4.2 {4490, 7451}
C2.2 Engines For Caterpillar Built Machines Data Link Configuration Status - Test
C175-16 Engine for Off-Highway Trucks Engine Oil Level Sensor