Plate Locations and Film Locations
Show/hide table
Illustration 1 | g03772744 |
(1) Location of the identification plate for the generator set |
The generator set consists of the generator and the engine. The location of the identification plate for the generator set is shown in illustration 1.
Show/hide table
Illustration 2 | g01185411 |
Right Side View of Engine Only (2) Location of serial number plate |
The Engine Serial Number Plate contains the following information:
- Engine serial number ____________________
- Engine model number ____________________
- Arrangement number ____________________
Show/hide table
Illustration 3 | g03146479 |
(3) Location of the engine information plate |
The Engine Information Plate contains the following information:
- Engine serial number ____________________
- Arrangement number ____________________
- Compression ratio ____________________
- Aftercooler temperature ____________________
- Power ____________________
- Full load RPM ____________________
Generator Identification Plate
Show/hide table
Illustration 4 | g03146516 |
Location of the generator identification plate |
The generator identification is located on the side of the generator.
The generator identification film includes the following information:
- Serial number for the generator ____________________
- Generator model number ____________________
Caterpillar Information System:
C7.1 Engines Engine Shutdown Occurrence
Caterpillar Petroleum Well Service Transmission Installation Appraisal Procedures{1400, 3030} Caterpillar Petroleum Well Service Transmission Installation Appraisal Procedures{1400, 3030}
2014/12/19 New Tube Assemblies Are Used on Certain G3600 Engines {1070, 1350}
2014/12/12 An Improved Wiring Harness Is Used on Certain G3600 Engines {1408}
Engine Speed May Elevate Unexpectedly on Certain Commercial Engines{1920} Engine Speed May Elevate Unexpectedly on Certain Commercial Engines{1920}
XQC1200 Power Module Engine Air Cleaner Service Indicator - Inspect
464-0265 Lifting Bracket Assembly{0374, 0599, 0629, 0632, 0700, 0708, 1353} 464-0265 Lifting Bracket Assembly{0374, 0599, 0629, 0632, 0700, 0708, 1353}
C13 Industrial Engine Fumes Disposal Filter Element - Replace - If Equipped
C13 Generator Set Engine Nitrogen Oxide Sensor - Remove and Install
XQ400 Power Module Engine Air Cleaner Element (Dual Element) - Inspect/Clean/Replace
C3.4B Engines Idle Validation - Test
Caterpillar Communication Regarding REACH Article 33{0374, 7000} Caterpillar Communication Regarding REACH Article 33{0374, 7000}
C3.4B Engines Indicator Lamp - Test
XQ375 and XQ425 Rental Generator Sets Product Lifting
C13 Generator Set Engine Atmospheric Pressure Sensor - Remove and Install
2014/12/19 New Differential Pressure Lines Routing Is Used For All C9.3 to C18 Tier 4 Interim Industrial Engines {108D}
C13 Generator Set Engine Camshaft Position Sensor - Remove and Install
C13 Generator Set Engine Crankshaft Position Sensor - Remove and Install
C7 Marine Engine Maintenance Interval Schedule - High Performance
C280 Marine Engines Exhaust System Contains Oil
C7 Marine Engine Maintenance Interval Schedule - Commercial Ratings
2015/01/06 Event Codes (E2131, E2132, or E2133) Appearing Occasionally with On-board Machine Systems with a PL321, or PL121 Satellite System Installed {7600, 7606}
C13 Generator Set Engine Coolant Temperature Sensor - Remove and Install
C9 Marine Engines Overhaul (Major)