Crankshaft Position Sensor - Remove and Install
- Remove cable straps (1).
- Disconnect crankshaft position sensor (2).
Show/hide table
Illustration 2 g03772967 - Remove crank position sensor (2).
Show/hide table
Illustration 1 | g03772917 |
- Install crankshaft position sensor (2) in the reverse order of removal.
- Make sure that crankshaft position sensor (2) is properly seated before tightening the bolt.
Caterpillar Information System:
C13 Generator Set Engine Camshaft Position Sensor - Remove and Install
2014/12/19 New Differential Pressure Lines Routing Is Used For All C9.3 to C18 Tier 4 Interim Industrial Engines {108D}
C13 Generator Set Engine Atmospheric Pressure Sensor - Remove and Install
XQ375 and XQ425 Rental Generator Sets Product Lifting
C3.4B Engines Indicator Lamp - Test
XQ375 and XQ425 Rental Generator Sets Plate Locations and Film Locations
C7.1 Engines Engine Shutdown Occurrence
Caterpillar Petroleum Well Service Transmission Installation Appraisal Procedures{1400, 3030} Caterpillar Petroleum Well Service Transmission Installation Appraisal Procedures{1400, 3030}
2014/12/19 New Tube Assemblies Are Used on Certain G3600 Engines {1070, 1350}
2014/12/12 An Improved Wiring Harness Is Used on Certain G3600 Engines {1408}
Engine Speed May Elevate Unexpectedly on Certain Commercial Engines{1920} Engine Speed May Elevate Unexpectedly on Certain Commercial Engines{1920}
XQC1200 Power Module Engine Air Cleaner Service Indicator - Inspect
C7 Marine Engine Maintenance Interval Schedule - High Performance
C280 Marine Engines Exhaust System Contains Oil
C7 Marine Engine Maintenance Interval Schedule - Commercial Ratings
2015/01/06 Event Codes (E2131, E2132, or E2133) Appearing Occasionally with On-board Machine Systems with a PL321, or PL121 Satellite System Installed {7600, 7606}
C13 Generator Set Engine Coolant Temperature Sensor - Remove and Install
C9 Marine Engines Overhaul (Major)
C4.4 and C6.6 Engines Engine Overcrank Occurrence
C7.1 Engines Engine Shutdown Occurs Intermittently
C7.1 Engines Engine Stalls at Low RPM
C7.1 Engines Engine Top Speed Is Not Obtained
Inspection of the Fan Drive Pulley and Belts{1357, 1358, 1359} Inspection of the Fan Drive Pulley and Belts{1357, 1358, 1359}
Installing the New Delta Pressure Lines on Certain Tier 4 Interim C9 To C18 Engines {108D} Installing the New Delta Pressure Lines on Certain Tier 4 Interim C9 To C18 Engines {108D}