New Tube Assemblies Are Used on Certain G3600 Engines {1070, 1350}
- Engine:
- G3612 (S/N: BKE1-UP)
- G3616 (S/N: BLB1-UP)
Description of Change: The new tube assemblies have brazed ends.
Adaptable To: The new tube assemblies replace the former tube assemblies and are adaptable back to first production on the serial numbers listed above. Refer to Table 2 for new and former part numbers.
Show/hide table
New Part Number     | Former Part Number     |
466-1085     | 196-4648     |
466-1086     | 196-4649     |
Show/hide table
Effective Serial Numbers     |
S/N:BKE00763-UP     |
S/N:BLB00937-UP     |
Caterpillar Information System:
2014/12/12 An Improved Wiring Harness Is Used on Certain G3600 Engines {1408}
Engine Speed May Elevate Unexpectedly on Certain Commercial Engines{1920} Engine Speed May Elevate Unexpectedly on Certain Commercial Engines{1920}
XQC1200 Power Module Engine Air Cleaner Service Indicator - Inspect
464-0265 Lifting Bracket Assembly{0374, 0599, 0629, 0632, 0700, 0708, 1353} 464-0265 Lifting Bracket Assembly{0374, 0599, 0629, 0632, 0700, 0708, 1353}
C13 Industrial Engine Fumes Disposal Filter Element - Replace - If Equipped
C13 Generator Set Engine Nitrogen Oxide Sensor - Remove and Install
XQ400 Power Module Engine Air Cleaner Element (Dual Element) - Inspect/Clean/Replace
C3.4B Engines Idle Validation - Test
Caterpillar Communication Regarding REACH Article 33{0374, 7000} Caterpillar Communication Regarding REACH Article 33{0374, 7000}
C7.1 Engines Engine Overspeeds
C7.1 Engines Engine Misfires, Runs Rough or Is Unstable
C11 and C13 Engines Crankshaft Rear Seal - Install
Caterpillar Petroleum Well Service Transmission Installation Appraisal Procedures{1400, 3030} Caterpillar Petroleum Well Service Transmission Installation Appraisal Procedures{1400, 3030}
C7.1 Engines Engine Shutdown Occurrence
XQ375 and XQ425 Rental Generator Sets Plate Locations and Film Locations
C3.4B Engines Indicator Lamp - Test
XQ375 and XQ425 Rental Generator Sets Product Lifting
C13 Generator Set Engine Atmospheric Pressure Sensor - Remove and Install
2014/12/19 New Differential Pressure Lines Routing Is Used For All C9.3 to C18 Tier 4 Interim Industrial Engines {108D}
C13 Generator Set Engine Camshaft Position Sensor - Remove and Install
C13 Generator Set Engine Crankshaft Position Sensor - Remove and Install
C7 Marine Engine Maintenance Interval Schedule - High Performance
C280 Marine Engines Exhaust System Contains Oil
C7 Marine Engine Maintenance Interval Schedule - Commercial Ratings