An Improved Wiring Harness Is Used on Certain G3600 Engines {1408}
- Engine:
- G3606 (S/N: 4ZS1-UP)
- G3608 (S/N: BEN1-UP)
- G3612 (S/N: BKE1-UP)
- G3616 (S/N: BLB1-UP)
Description of Change: The improved wiring harness has an improved connector potting process.
Adaptable To: The improved 205-3584 Wiring Harness replaces the existing wiring harness. The improved wiring harness is adaptable back to first production on the serial numbers listed above.
This change is effective on the serial numbers listed in Table 1.
Show/hide table
Effective Serial Numbers     |
S/N:4ZS01939-UP     |
S/N:BEN00941-UP     |
S/N:BKE00699-UP     |
S/N:BLB00899-UP     |
Caterpillar Information System:
Engine Speed May Elevate Unexpectedly on Certain Commercial Engines{1920} Engine Speed May Elevate Unexpectedly on Certain Commercial Engines{1920}
XQC1200 Power Module Engine Air Cleaner Service Indicator - Inspect
464-0265 Lifting Bracket Assembly{0374, 0599, 0629, 0632, 0700, 0708, 1353} 464-0265 Lifting Bracket Assembly{0374, 0599, 0629, 0632, 0700, 0708, 1353}
C13 Industrial Engine Fumes Disposal Filter Element - Replace - If Equipped
C13 Generator Set Engine Nitrogen Oxide Sensor - Remove and Install
XQ400 Power Module Engine Air Cleaner Element (Dual Element) - Inspect/Clean/Replace
C3.4B Engines Idle Validation - Test
Caterpillar Communication Regarding REACH Article 33{0374, 7000} Caterpillar Communication Regarding REACH Article 33{0374, 7000}
C7.1 Engines Engine Overspeeds
C7.1 Engines Engine Misfires, Runs Rough or Is Unstable
C11 and C13 Engines Crankshaft Rear Seal - Install
C11 and C13 Engines Crankshaft Rear Seal - Remove
2014/12/19 New Tube Assemblies Are Used on Certain G3600 Engines {1070, 1350}
Caterpillar Petroleum Well Service Transmission Installation Appraisal Procedures{1400, 3030} Caterpillar Petroleum Well Service Transmission Installation Appraisal Procedures{1400, 3030}
C7.1 Engines Engine Shutdown Occurrence
XQ375 and XQ425 Rental Generator Sets Plate Locations and Film Locations
C3.4B Engines Indicator Lamp - Test
XQ375 and XQ425 Rental Generator Sets Product Lifting
C13 Generator Set Engine Atmospheric Pressure Sensor - Remove and Install
2014/12/19 New Differential Pressure Lines Routing Is Used For All C9.3 to C18 Tier 4 Interim Industrial Engines {108D}
C13 Generator Set Engine Camshaft Position Sensor - Remove and Install
C13 Generator Set Engine Crankshaft Position Sensor - Remove and Install
C7 Marine Engine Maintenance Interval Schedule - High Performance
C280 Marine Engines Exhaust System Contains Oil