Engine Speed/Timing Sensor - Remove and Install
Show/hide table
| Required Tools | |||
| Tool | Part Number | Part Description | Qty |
| A | - | Loctite C5-A Copper Anti-Seize Lubricant | - |
Show/hide table
| NOTICE |
|---|
|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Isolate the electric power generation set. Refer to Operation and Maintenance Manual, "Generator Isolating for Maintenance" for the correct procedure.
Show/hide table
Illustration 1 g03705982 - Disconnect harness assembly (1).
- Remove engine speed/timing sensor (2) from the flywheel housing. Remove the O-ring seal from the engine speed/timing sensor.
- Install the O-ring seal on engine speed/timing sensor (2). Extend the sliphead of engine speed/timing sensor (2) to a minimum distance of 4.0 mm (0.16 inch) prior to installation.
- Apply Tooling (A) to the threads of engine speed/timing sensor (2). Install the engine speed/timing sensor in the flywheel housing and tighten to a torque of
40 ± 5 N·m (30 ± 4 lb ft) . - Connect harness assembly (1).
Show/hide table
| |
| Illustration 2 | g03705982 |
Caterpillar Information System:
C3.4B Engines Fuel Consumption Is Excessive
C8.7 Marine Engine Engine Air Cleaner Service Indicator - Inspect
C8.7 Marine Engine Cooling System Supplemental Coolant Additive (SCA) - Test/Add
C3.4B Engines Exhaust System Contains Oil
XQC1200 and XQC1600 Power Modules Atmospheric Pressure Sensor - Remove and Install
C8.7 Marine Engine Coolant Sample (Level 1) - Obtain
C3.4B Engines Exhaust Has Excessive Black Smoke
C3.4B Engines Engine Top Speed Is Not Obtained
C3.4B Engines Engine Stalls at Low RPM
XQC1200 and XQC1600 Power Modules Engine Speed Sensor - Remove and Install
3304B-XQ125 Rental Generator Set Engine Storage
XQC1200 and XQC1600 Power Modules Regulator (Engine Oil Level) - Remove and Install
2014/08/08 Cat® Reman Has Added Alternators and Starting Motor Groups for Certain Engines and Generator Set Engines {1405, 1453}
2014/08/15 Cat® Reman Has Added Alternators and Starting Motor Groups for Certain Machine Engines {1405, 1453}
2014/08/01 Cat® Reman Now Offers Additional Engine Options for Certain C32 Industrial Engines {1000}
XQC1200 and XQC1600 Power Modules Aftercooler Coolant Temperature Sensor - Remove and Install - Aftercooler Inlet Temperature
XQC1200 and XQC1600 Power Modules Coolant Temperature Sensor - Remove and Install
2014/08/20 Service Meter Adjustment Is Now Available in VisionLinkTM {7478, 7606}
2014/08/01 New Instrument Panel Box Gp Is Now Available as a Service Replacement for Certain Cat® Products {4490}
XQC1200 and XQC1600 Power Modules Coolant Temperature Sensor - Remove and Install - Inlet Water Temperature Sensor
C3.4B Engines Fuel Rail Pressure Problem
C8.7 Marine Engine Fluid Recommendations
C3.3 Industrial Engine Burn Prevention
PM620 and PM622 Cold Planer Air Tank - Drain