Atmospheric Pressure Sensor - Remove and Install
Show/hide table
| NOTICE |
|---|
|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Isolate the electric power generation set. Refer to Operation and Maintenance Manual, "Generator Isolating for Maintenance" for the correct procedure.
Show/hide table
Illustration 1 g03705896 - Disconnect harness assembly (1) and remove atmospheric pressure sensor (2).
- Remove the O-ring seal from atmospheric pressure sensor (2).
- Install atmospheric pressure sensor (2) in the reverse order of removal.
- Tighten atmospheric pressure sensor (2) to a torque of
10 ± 2 N·m (89 ± 18 lb in) .
- Tighten atmospheric pressure sensor (2) to a torque of
Caterpillar Information System:
C8.7 Marine Engine Coolant Sample (Level 1) - Obtain
C3.4B Engines Exhaust Has Excessive Black Smoke
C3.4B Engines Engine Top Speed Is Not Obtained
C3.4B Engines Engine Stalls at Low RPM
XQC1200 and XQC1600 Power Modules Engine Speed Sensor - Remove and Install
3304B-XQ125 Rental Generator Set Engine Storage
XQC1200 and XQC1600 Power Modules Regulator (Engine Oil Level) - Remove and Install
326F Excavator Sound Information and Vibration Information
2014/08/01 A New Emergency Stop Contact Is Used On Certain C18 Marine Engines {4490, 7418, 7490}
XQC1200 and XQC1600 Power Modules Valve Mechanism Cover Base - Remove and Install
3304B-XQ125 Rental Generator Set Safety Messages
C13 and C15 On-Highway Engines Maintenance Interval Schedule - C13 and C15 On-highway Engines with Standard (Deep) Oil Pans
C3.4B Engines Exhaust System Contains Oil
C8.7 Marine Engine Cooling System Supplemental Coolant Additive (SCA) - Test/Add
C8.7 Marine Engine Engine Air Cleaner Service Indicator - Inspect
C3.4B Engines Fuel Consumption Is Excessive
XQC1200 and XQC1600 Power Modules Engine Speed/Timing Sensor - Remove and Install
2014/08/08 Cat® Reman Has Added Alternators and Starting Motor Groups for Certain Engines and Generator Set Engines {1405, 1453}
2014/08/15 Cat® Reman Has Added Alternators and Starting Motor Groups for Certain Machine Engines {1405, 1453}
2014/08/01 Cat® Reman Now Offers Additional Engine Options for Certain C32 Industrial Engines {1000}
XQC1200 and XQC1600 Power Modules Aftercooler Coolant Temperature Sensor - Remove and Install - Aftercooler Inlet Temperature
XQC1200 and XQC1600 Power Modules Coolant Temperature Sensor - Remove and Install
2014/08/20 Service Meter Adjustment Is Now Available in VisionLinkTM {7478, 7606}
2014/08/01 New Instrument Panel Box Gp Is Now Available as a Service Replacement for Certain Cat® Products {4490}