Engine Speed Sensor - Remove and Install
Show/hide table
| NOTICE |
|---|
|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Isolate the electric power generation set. Refer to Operation and Maintenance Manual, "Generator Isolating for Maintenance" for the correct procedure.
Show/hide table
Illustration 1 g03705680 - Disconnect harness assembly (1).
- Loosen the locknut and remove engine speed sensor (2) from the flywheel housing.
Show/hide table
| NOTICE |
|---|
|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Install engine speed sensor (2) in the flywheel housing. Turn the engine speed sensor until there is contact with the tooth of the ring gear of flywheel (3). Turn the engine speed sensor for 1/2 of a turn away from the ring gear. Tighten the locknut to a torque of
25 ± 5 N·m (18 ± 4 lb ft) . - Connect harness assembly (1).
Show/hide table
| |
| Illustration 2 | g03705680 |
Caterpillar Information System:
3304B-XQ125 Rental Generator Set Engine Storage
XQC1200 and XQC1600 Power Modules Regulator (Engine Oil Level) - Remove and Install
326F Excavator Sound Information and Vibration Information
2014/08/01 A New Emergency Stop Contact Is Used On Certain C18 Marine Engines {4490, 7418, 7490}
XQC1200 and XQC1600 Power Modules Valve Mechanism Cover Base - Remove and Install
3304B-XQ125 Rental Generator Set Safety Messages
C13 and C15 On-Highway Engines Maintenance Interval Schedule - C13 and C15 On-highway Engines with Standard (Deep) Oil Pans
C13 and C15 On-Highway Engines Maintenance Interval Schedule - C13 Engines with Standard (Deep) Sumps and 500 HP Field Up-Rates or C13 Engines with Standard (Deep) Sumps and 525 hp RV Ratings or C13 Engines with Center Oil Pans
2014/07/25 New Exhaust Bellows Assemblies and Band Clamps Are Used On Certain C175 Engines {1059}
XQC1200 and XQC1600 Power Modules Rocker Shaft and Push Rod - Remove and Install
3304B-XQ125 Rental Generator Set Maintenance Interval Schedule - Standby
3304B-XQ125 Rental Generator Set Maintenance Interval Schedule - Prime
C3.4B Engines Engine Stalls at Low RPM
C3.4B Engines Engine Top Speed Is Not Obtained
C3.4B Engines Exhaust Has Excessive Black Smoke
C8.7 Marine Engine Coolant Sample (Level 1) - Obtain
XQC1200 and XQC1600 Power Modules Atmospheric Pressure Sensor - Remove and Install
C3.4B Engines Exhaust System Contains Oil
C8.7 Marine Engine Cooling System Supplemental Coolant Additive (SCA) - Test/Add
C8.7 Marine Engine Engine Air Cleaner Service Indicator - Inspect
C3.4B Engines Fuel Consumption Is Excessive
XQC1200 and XQC1600 Power Modules Engine Speed/Timing Sensor - Remove and Install
2014/08/08 Cat® Reman Has Added Alternators and Starting Motor Groups for Certain Engines and Generator Set Engines {1405, 1453}
2014/08/15 Cat® Reman Has Added Alternators and Starting Motor Groups for Certain Machine Engines {1405, 1453}