Engine Oil Pressure Sensor - Remove and Install
拆卸步骤
Show/hide table
注意 |
---|
在进行检验、保养、测试、调整及维修产品期间,必须小心以确保装好排放出的油液。 在打开任何舱室或解体任何储有液体的部件之前,要准备好合适的容器收集液体。 有关收集和盛接 Cat 产品上油液的适用工具和用品,请参阅专门出版物, NENG2500, "代理商维修工具目录"。 按照当地法规和要求处置所有液体。 |
Show/hide table
注意 |
---|
保持所有零件清洁无杂质。 杂质会造成快速磨损和缩短部件寿命。 |
- 断开线束组件 (1) 。
Show/hide table
图 1 | g03685982 |
- 将发动机机油压力传感器 (2) 从缸体上的适配器上拆下。
- 将 O 形密封圈(未显示)从发动机机油压力传感器 (2) 上拆下。
安装步骤
Show/hide table
注意 |
---|
保持所有零件清洁无杂质。 杂质会造成快速磨损和缩短部件寿命。 |
- 将一个新的 O 形密封圈安装在发动机机油压力传感器 (2) 上。
Show/hide table
图 2 | g03685982 |
- 安装发动机机油压力传感器 (2) 并拧紧至扭矩为 10 ± 2 N·m (89 ± 18 lb in)。
- 连接线束组件 (1) 。
Caterpillar Information System:
C27 and C32 Generator Set Engines Coolant Temperature Sensor - Remove and Install
C27 and C32 Generator Set Engines Crankshaft Position Sensor - Remove and Install
C27 and C32 Generator Set Engines Camshaft Position Sensor - Remove and Install
C4.4 Engines for Caterpillar Built Machines Camshaft Gear - Remove and Install
C27 and C32 Generator Set Engines Atmospheric Pressure Sensor - Remove and Install
C27 and C32 Generator Set Engines Turbocharger - Assemble
Procedure for Installing the Continuous Engine Prelube Oil Pump Group and Lines Group for Certain 3508 Fire Pump Engines{1307, 1319} Procedure for Installing the Continuous Engine Prelube Oil Pump Group and Lines Group for Certain 3508 Fire Pump Engines{1307, 1319}
The Check Ball in the Spool Assembly of the Main Relief Valve May be Missing on Various Products{3133, 3182, 3210, 3213} The Check Ball in the Spool Assembly of the Main Relief Valve May be Missing on Various Products{3133, 3182, 3210, 3213}
C4.4 Engines for Caterpillar Built Machines Crankshaft Timing Ring - Remove and Install
Customer Assembly Requirements for C3.4B Engine {1000, 108D} Customer Assembly Requirements for C3.4B Engine {1000, 108D}
455-1188 Major Overhaul Foundational Kit for C18 Marine Engines{1000} 455-1188 Major Overhaul Foundational Kit for C18 Marine Engines{1000}
G3306B Petroleum Generator Set Engines Electrical Connectors
C27 and C32 Generator Set Engines Fuel Pressure Sensor - Remove and Install
C27 and C32 Generator Set Engines Fuel Temperature Sensor - Remove and Install
C27 and C32 Generator Set Engines Inlet Air Temperature Sensor - Remove and Install
C27 and C32 Generator Set Engines Turbocharger Outlet Pressure Sensor - Remove and Install
C27 and C32 Generator Set Engines Electronic Control Module - Remove and Install
455-1194 Top End Overhaul Foundational Kit for C18 Marine Engines{1000} 455-1194 Top End Overhaul Foundational Kit for C18 Marine Engines{1000}
XQC1200 and XQC1600 Power Modules Exhaust Elbow - Remove and Install
Procedure for Seismic Anchor Installation of Multi Module Systems{4480} Procedure for Seismic Anchor Installation of Multi Module Systems{4480}
Installation Guide for the Tire Monitoring System on Cat® and Non-Cat Equipment {4203, 7490} Installation Guide for the Tire Monitoring System on Cat® and Non-Cat Equipment {4203, 7490}
C3.4B Engines for Caterpillar Built Machines Fuel Priming Pump - Remove and Install
C3.4B Engines for Caterpillar Built Machines Flow Control Valve - Remove and Install
C3.4B Engines for Caterpillar Built Machines Fuel Filter Base - Remove and Install