390F MHPU Mobile Hydraulic Power Unit Machine System Specifications Caterpillar


Motor Lines (Reversing Fan)

Usage:

390F B37


Illustration 1g06305368
Top view

Table 1
Item  Qty  Part  Specification Description 
096-4883 Locknut  Torque to 22 ± 3 N·m (195 ± 27 lb in)
385-3061 Pipe As  Torque to 76 ± 4 N·m (56 ± 3 lb ft)
370-0133 Hose As  Torque to 160 ± 16 N·m (118 ± 12 lb ft)
368-0409 Hose As  Torque to 160 ± 16 N·m (118 ± 12 lb ft)
368-0410 Hose As  Torque to 160 ± 16 N·m (118 ± 12 lb ft)
368-0411 Hose As  Torque to 160 ± 16 N·m (118 ± 12 lb ft)
115-3796 Hose As  Torque to 76 ± 4 N·m (56 ± 3 lb ft)
368-0417 Hose As  Torque to 76 ± 4 N·m (56 ± 3 lb ft)
480-0577 Hose As  Torque to 114.5 ± 17.0 N·m (84.5 ± 12.5 lb ft)
Sharp corners at the cutting edge of each cable strap shall not be allowed. 

Caterpillar Information System:

390F MHPU Mobile Hydraulic Power Unit Machine System Specifications Swing Gear and Bearing
C13, C15, and C18 Tier 4 Final Engines Variable Valve Actuator
390F Excavator Machine System Swing Drive Mounting
3512C HD and 3516C HD IPP Rental Power Modules Speed Control - Test
C15 Industrial Engines Maintenance Interval Schedule - Engines Which Have Deep Sumps
C15 Industrial Engines Maintenance Interval Schedule - Engines Which Have Shallow Sumps
390F Excavator Machine Systems Pilot Valve (Travel) - Remove and Install
G3306B Generator Sets Alarms and Shutoffs
390F Excavator Machine Systems Pump Drive Coupling - Remove and Install
C4.4 Marine Generator Set Voltage Regulators - R438 Automatic Voltage Regulation AVR
C4.4 Marine Generator Set Control Panel Mounting
C13, C15, and C18 Tier 4 Final Engines Exhaust Manifold
C13, C15, and C18 Tier 4 Final Engines Variable Valve Actuator Oil Diverter Valve
C15 and C18 Engines for Caterpillar Built Machines Flywheel Housing
C9.3 Tier 4 Final Engines Crankshaft Seals
C13, C15, and C18 Tier 4 Final Engines Engine Support (Front)
390F MHPU Mobile Hydraulic Power Unit Machine System Specifications Cooling Lines
C15 and C18 Engines for Caterpillar Built Machines Valve Rocker Arm
C13, C15, and C18 Tier 4 Final Engines Air Compressor
C13 Tier 4 Final Engines Temperature Sensor (Catalyst Inlet)
C9.3 Tier 4 Final Engines Turbocharger
390F Excavator Machine Systems Pilot Valve (Travel) - Disassemble
390F Excavator Machine Systems Pilot Valve (Travel) - Assemble
C9.3 Tier 4 Final Engines Engine Oil Pan
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.