Turbocharger
Show/hide table
Illustration 1 | g03509899 |
Show/hide table
Specification for 399-3400 Turbocharger Gp | |||
Item | Qty | Part | Specification Description |
1 | 1 | 239-5858 Compressor Clamp Assembly | Torque to |
2 | 1 | 361-7981 Band Clamp | Use the following procedure to tighten the band clamp: 1. Tighten the clamp to 2. Loosen the clamp one to two turns. 3. Again tighten the clamp to |
3 | 4 | 375-2467 Flange Locknut | Before assembly, lubricate the threads and bearing surfaces with Loctite C5A Copper Anti-Seize.
Tighten the flange locknut in crisscross pattern to |
Caterpillar Information System:
C13 Tier 4 Final Engines Temperature Sensor (Catalyst Inlet)
C13, C15, and C18 Tier 4 Final Engines Air Compressor
C15 and C18 Engines for Caterpillar Built Machines Valve Rocker Arm
390F MHPU Mobile Hydraulic Power Unit Machine System Specifications Cooling Lines
C13, C15, and C18 Tier 4 Final Engines Engine Support (Front)
C9.3 Tier 4 Final Engines Crankshaft Seals
C15 and C18 Engines for Caterpillar Built Machines Flywheel Housing
C13, C15, and C18 Tier 4 Final Engines Variable Valve Actuator Oil Diverter Valve
390F MHPU Mobile Hydraulic Power Unit Machine System Specifications Motor Lines (Reversing Fan)
390F MHPU Mobile Hydraulic Power Unit Machine System Specifications Swing Gear and Bearing
C13, C15, and C18 Tier 4 Final Engines Variable Valve Actuator
390F Excavator Machine System Swing Drive Mounting
390F Excavator Machine Systems Pilot Valve (Travel) - Disassemble
390F Excavator Machine Systems Pilot Valve (Travel) - Assemble
C9.3 Tier 4 Final Engines Engine Oil Pan
C9.3 Tier 4 Final Engines Diesel Particulate Filter
TH55FT-E70 and TH55FT-E90 Transmissions Maintenance Interval Schedule
374F Excavator Machine System Gear Pump
C9.3 Tier 4 Final Engines Camshaft
390F MHPU Mobile Hydraulic Power Unit Machine System Specifications Relief Valve (Pilot)
3512C Marine Auxiliary Generator Set Engines with Dynamic Gas Blending Fuel Temperature Is Low
390F MHPU Mobile Hydraulic Power Unit Machine System Specifications Relief Valve (Pilot)
390F Excavator Machine Systems Cab - Remove and Install
3512C HD and 3516C HD IPP Rental Power Modules Sensor Supply - Test