Swing Drive Mounting
Show/hide table
| |
| Illustration 1 | g03654540 |
Show/hide table
| Specification for 378-9545 Swing Drive and Mounting Gp | |||
|---|---|---|---|
| Item | Qty | Part | Specification Description |
| 1 | 4 | 096-4883 Locknut | Before assembly, apply blue Loctite 243 to the threads.
Torque to |
| 2 | 2 | 096-4755 Pin | Before assembly, apply Loctite C5A Copper anti-seize to the pin. |
| 3 | 1 | 8T-4137 Bolt | Before assembly, apply blue Loctite 243 to threads. |
| 4 | 46 | 509-7907 Bolt | Before assembly, remove compound, oil and dust from female threads, then apply Loctite 243 to the threads.
Use the following tightening procedure: 1. Tighten bolts to 2. Turn to an additional angle of 45 ± 5 degrees. |
| 5 | - | - | Before assembly, the surfaces must be clean and free of protective coating. |
| 6 | 2 | 5D-1026 Band Clamp | Torque to |
Caterpillar Information System:
3512C HD and 3516C HD IPP Rental Power Modules Speed Control - Test
C15 Industrial Engines Maintenance Interval Schedule - Engines Which Have Deep Sumps
C15 Industrial Engines Maintenance Interval Schedule - Engines Which Have Shallow Sumps
390F Excavator Machine Systems Pilot Valve (Travel) - Remove and Install
G3306B Generator Sets Alarms and Shutoffs
390F Excavator Machine Systems Pump Drive Coupling - Remove and Install
C4.4 Marine Generator Set Voltage Regulators - R438 Automatic Voltage Regulation AVR
C4.4 Marine Generator Set Control Panel Mounting
C13, C15, and C18 Tier 4 Final Engines Exhaust Manifold
374F Excavator Machine System Control Valve
C13, C15, and C18 Tier 4 Final Engines Exhaust Manifold
C13, C15, and C18 Tier 4 Final Engines Fuel Priming Pump and Primary Fuel Filter
C13, C15, and C18 Tier 4 Final Engines Variable Valve Actuator
390F MHPU Mobile Hydraulic Power Unit Machine System Specifications Swing Gear and Bearing
390F MHPU Mobile Hydraulic Power Unit Machine System Specifications Motor Lines (Reversing Fan)
C13, C15, and C18 Tier 4 Final Engines Variable Valve Actuator Oil Diverter Valve
C15 and C18 Engines for Caterpillar Built Machines Flywheel Housing
C9.3 Tier 4 Final Engines Crankshaft Seals
C13, C15, and C18 Tier 4 Final Engines Engine Support (Front)
390F MHPU Mobile Hydraulic Power Unit Machine System Specifications Cooling Lines
C15 and C18 Engines for Caterpillar Built Machines Valve Rocker Arm
C13, C15, and C18 Tier 4 Final Engines Air Compressor
C13 Tier 4 Final Engines Temperature Sensor (Catalyst Inlet)
C9.3 Tier 4 Final Engines Turbocharger