Exhaust Manifold
Show/hide table
图 1 | g03654044 |
俯视图 |
Show/hide table
图 2 | g03654045 |
拧紧顺序 |
Show/hide table
380-5804 排气歧管总成的技术规格 | |||
项目 | 数量 | 零件 | 技术规格说明 |
1 | 12 | 106-1792 锥形锁紧螺柱 | 装配前,将 Loctite C5A 铜防咬合剂涂覆到螺纹上。
拧紧至扭矩为 |
2 | 12 | 2N-2766 锁紧螺母 | 在装配前,向螺纹和轴承表面涂覆 Loctite C5A 铜防咬合剂。
1. 按照数字顺序将锁紧螺母拧紧至扭矩为 2. 再次按照数字顺序将锁紧螺母拧紧至扭矩为 |
Show/hide table
图 3 | g03654049 |
右视图 |
Show/hide table
项目 | 数量 | 零件 | 技术规格说明 |
3 | 4 | 357-0351 锥形锁紧螺柱 | 装配前,将 Loctite C5A 铜防咬合剂涂覆到螺纹上。
拧紧至扭矩为 |
4 | 1 | 336-1468 排气歧管 | 组装前,向凸端岐管的外径和凹端岐管的内径涂抹一薄层 2P-2333 高温密封胶。 去除组装好的接头上的多余密封胶。 |
5 | 1 | 377-1066 排气歧管 | 组装前,向凸端岐管的外径和凹端岐管的内径涂抹一薄层 2P-2333 高温密封胶。 去除组装好的接头上的多余密封胶。 |
6 | 1 | 377-1067 排气歧管 | 组装前,向凸端岐管的外径和凹端岐管的内径涂抹一薄层 2P-2333 高温密封胶。 去除组装好的接头上的多余密封胶。 |
Caterpillar Information System:
374F Excavator Machine System Control Valve
C13, C15, and C18 Tier 4 Final Engines Exhaust Manifold
C13, C15, and C18 Tier 4 Final Engines Fuel Priming Pump and Primary Fuel Filter
C13, C15, and C18 Tier 4 Final Engines Exhaust Manifold
C13, C15, and C18 Tier 4 Final Engines Exhaust Lines
390F Excavator Machine System Grease Lines
C4.4 Marine Generator Set Heat Exchanger
C13, C15, and C18 Tier 4 Final Engines Diesel Particulate Filter
C13, C15, and C18 Tier 4 Final Engines Exhaust Cooler (NRS)
C4.4 Marine Generator Set Turbocharger
C13, C15, and C18 Tier 4 Final Engines Mounting Frame
C4.4 Marine Generator Set Starting the Engine
C4.4 Marine Generator Set Control Panel Mounting
C4.4 Marine Generator Set Voltage Regulators - R438 Automatic Voltage Regulation AVR
390F Excavator Machine Systems Pump Drive Coupling - Remove and Install
G3306B Generator Sets Alarms and Shutoffs
390F Excavator Machine Systems Pilot Valve (Travel) - Remove and Install
C15 Industrial Engines Maintenance Interval Schedule - Engines Which Have Shallow Sumps
C15 Industrial Engines Maintenance Interval Schedule - Engines Which Have Deep Sumps
3512C HD and 3516C HD IPP Rental Power Modules Speed Control - Test
390F Excavator Machine System Swing Drive Mounting
C13, C15, and C18 Tier 4 Final Engines Variable Valve Actuator
390F MHPU Mobile Hydraulic Power Unit Machine System Specifications Swing Gear and Bearing
390F MHPU Mobile Hydraulic Power Unit Machine System Specifications Motor Lines (Reversing Fan)