Exhaust Manifold
Show/hide table
| |
| 图 1 | g03654034 |
|
俯视图 | |
Show/hide table
| |
| 图 2 | g03654035 |
|
拧紧顺序 | |
Show/hide table
| 380-8512 排气歧管总成的技术规格 | |||
| 项目 | 数量 | 零件 | 技术规格说明 |
| 1 | 12 | 106-1792 锥形锁紧螺柱 | 装配前，将 Loctite C5A 铜防咬合剂涂覆到螺纹上。
拧紧至扭矩为 |
| 2 | 12 | 2N-2766 锁紧螺母 | 在装配前，向螺纹和轴承表面涂覆 Loctite C5A 铜防咬合剂。
1. 按照数字顺序将锁紧螺母拧紧至扭矩为 2. 再次按照数字顺序将锁紧螺母拧紧至扭矩为 |
| 3 | 4 | 357-0351 锥形锁紧螺柱 | 装配前，将 Loctite C5A 铜防咬合剂涂覆到螺纹上。
拧紧至扭矩为 |
Show/hide table
| |
| 图 3 | g03654038 |
|
右视图 | |
Show/hide table
| 项目 | 数量 | 零件 | 技术规格说明 |
| 4 | 2 | 133-3359 排气歧管 | 组装前，向凸端岐管的外径和凹端岐管的内径涂抹一薄层 2P-2333 高温密封胶。 去除组装好的接头上的多余密封胶。 |
| 5 | 1 | 380-8545 排气歧管 | 组装前，向凸端岐管的外径和凹端岐管的内径涂抹一薄层 2P-2333 高温密封胶。 去除组装好的接头上的多余密封胶。 |
Caterpillar Information System:
C13, C15, and C18 Tier 4 Final Engines Fuel Priming Pump and Primary Fuel Filter
C13, C15, and C18 Tier 4 Final Engines Exhaust Manifold
C13, C15, and C18 Tier 4 Final Engines Exhaust Lines
390F Excavator Machine System Grease Lines
C4.4 Marine Generator Set Heat Exchanger
C13, C15, and C18 Tier 4 Final Engines Diesel Particulate Filter
C13, C15, and C18 Tier 4 Final Engines Exhaust Cooler (NRS)
C4.4 Marine Generator Set Turbocharger
C13, C15, and C18 Tier 4 Final Engines Mounting Frame
C4.4 Marine Generator Set Starting the Engine
C13, C15, and C18 Tier 4 Final Engines Mounting Frame
C13, C15, and C18 Tier 4 Final Engines Mounting Frame
374F Excavator Machine System Control Valve
C13, C15, and C18 Tier 4 Final Engines Exhaust Manifold
C4.4 Marine Generator Set Control Panel Mounting
C4.4 Marine Generator Set Voltage Regulators - R438 Automatic Voltage Regulation AVR
390F Excavator Machine Systems Pump Drive Coupling - Remove and Install
G3306B Generator Sets Alarms and Shutoffs
390F Excavator Machine Systems Pilot Valve (Travel) - Remove and Install
C15 Industrial Engines Maintenance Interval Schedule - Engines Which Have Shallow Sumps
C15 Industrial Engines Maintenance Interval Schedule - Engines Which Have Deep Sumps
3512C HD and 3516C HD IPP Rental Power Modules Speed Control - Test
390F Excavator Machine System Swing Drive Mounting
C13, C15, and C18 Tier 4 Final Engines Variable Valve Actuator