Camshaft
Show/hide table
Illustration 1 | g03369757 |
Show/hide table
Specifications for 361-5596 Camshaft Gp | |||
Item | Qty | Part | Specification Description |
1 | 4 | 8T-0338 Bolt | Torque to |
Show/hide table
Illustration 2 | g03654734 |
Show/hide table
Item | Qty | Part | Specification Description |
B | - | - | Diameter of camshaft bearing journal is |
- | - | - | Use the following procedure in order to determine the actual camshaft lobe lift:
1. Measure camshaft lobe height (C). 2. Measure base circle (D). 3. Subtract the base circle (D) from the camshaft lobe height (C). The difference is the actual camshaft lobe lift. |
B | - | - | Specified camshaft lobe lift for:
Inlet lobe is Exhaust lobe is Injector lobe is |
Caterpillar Information System:
374F Excavator Machine System Gear Pump
TH55FT-E70 and TH55FT-E90 Transmissions Maintenance Interval Schedule
C9.3 Tier 4 Final Engines Diesel Particulate Filter
C9.3 Tier 4 Final Engines Engine Oil Pan
390F Excavator Machine Systems Pilot Valve (Travel) - Assemble
390F Excavator Machine Systems Pilot Valve (Travel) - Disassemble
C9.3 Tier 4 Final Engines Turbocharger
C13 Tier 4 Final Engines Temperature Sensor (Catalyst Inlet)
C13, C15, and C18 Tier 4 Final Engines Air Compressor
C15 and C18 Engines for Caterpillar Built Machines Valve Rocker Arm
390F MHPU Mobile Hydraulic Power Unit Machine System Specifications Cooling Lines
C13, C15, and C18 Tier 4 Final Engines Engine Support (Front)
390F MHPU Mobile Hydraulic Power Unit Machine System Specifications Relief Valve (Pilot)
3512C Marine Auxiliary Generator Set Engines with Dynamic Gas Blending Fuel Temperature Is Low
390F MHPU Mobile Hydraulic Power Unit Machine System Specifications Relief Valve (Pilot)
390F Excavator Machine Systems Cab - Remove and Install
3512C HD and 3516C HD IPP Rental Power Modules Sensor Supply - Test
CX48-P2300-3512 Petroleum Power Train Package and CX48-P2300 Petroleum Transmission Transmission Maintenance Interval Schedule
797 Off-Highway Truck Powered Stairway - Check
390F Excavator Machine Systems Hydraulic Tank - Remove and Install
390F Excavator Machine Systems Counterweight Cylinder - Remove and Install
336 and 336 GC Excavator Emissions Certification Film
G3306B Generator Sets Valve Stem Projection - Measure/Record
3512C HD and 3516C HD IPP Rental Power Modules Sensor Signal (PWM) - Test