Turbocharger - Disassemble
Disassembly Procedure
Start By:
- Remove Turbocharger
Show/hide table
| NOTICE |
|---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Remove hose (1), clamp (2), and clamp (3) .
Show/hide table
 | |
| Illustration 1 | g03646218 |
- Separate turbine housing (4) and compressor housing (6) from cartridge (5) .
Show/hide table
 | |
| Illustration 2 | g03646515 |
Show/hide table
| NOTICE |
|---|
Do not attempt to disassemble the turbocharger cartridge assembly or wastegate. Do not remove the compressor wheel. The turbocharger cartridge assembly and the wastegate are not field-serviced, and should be replaced only as a unit. |
Caterpillar Information System:
XQC1600 Power Module Starting the Engine
390F Excavator Machine Systems Stick Cylinder - Remove and Install
3512C and 3516C Marine Auxiliary and Generator Set Engines Fluid Recommendations
390F Excavator Machine Systems Drift Reduction Valve (Stick) - Assemble
3512C and 3516C Marine Auxiliary and Generator Set Engines Starting the Engine - Natural Gas
390F Excavator Machine Systems Drift Reduction Valve (Stick) - Disassemble
C15 and C18 Engines for Caterpillar Built Machines Alternator Mounting
3512C Oil Well Service Engines Maintenance Interval Schedule
2014/03/14 New Generator Set Software Gp Is Now Available On Certain G3306B Genset Packages {1920, 4490, 7620}
390F Excavator Machine Systems Location of Components (Return System)
390F Excavator Machine Systems Drift Reduction Valve (Stick) - Remove and Install
DE Series Generator Set With Cat C7.1 Engine Fuel System Primary Filter/Water Separator - Drain
390F Excavator Machine Systems Stick - Remove and Install
3512C HD and 3516C HD IPP Rental Power Modules Coolant Level Is Low
G3306B Generator Sets Manual Stop Procedure
3512C HD and 3516C HD IPP Rental Power Modules Coolant Temperature Is High
XQC1600 Power Module General Maintenance Information
3512C HD and 3516C HD IPP Rental Power Modules Coolant Temperature Is Low
390F Excavator Machine Systems Bucket Cylinder - Remove and Install
G3306B Generator Sets Control Panel - Inspect/Test
G3306B Generator Sets Gas Pressure Regulator - Test
C4.4 Engines for Caterpillar Built Machines Gear Group (Front) - Remove and Install
3512C HD and 3516C HD IPP Rental Power Modules Crankcase Pressure Is High
G3306B Generator Sets Generator - Dry