Alternator Mounting
Show/hide table
| |
| 图 1 | g03646001 |
| (3) 皮带 | |
(1) 皮带轮固定螺母
- 扭矩 ...
127 ± 10 N·m (95 ± 8 lb ft)
(2) 皮带轮
- 皮带轮间的失准度应不大于以下值： ... 0.4 度
注: 安装前，向所有螺栓螺纹上涂覆 Bostic Neverseez 船用级。
Caterpillar Information System:
3512C Oil Well Service Engines Maintenance Interval Schedule
2014/03/14 New Generator Set Software Gp Is Now Available On Certain G3306B Genset Packages {1920, 4490, 7620}
390F Excavator Machine Systems Location of Components (Return System)
390F Excavator Machine Systems Drift Reduction Valve (Stick) - Remove and Install
DE Series Generator Set With Cat C7.1 Engine Fuel System Primary Filter/Water Separator - Drain
DE Series Generator Set With Cat C7.1 Engine Fuel Injection Nozzles - Test/Exchange
DE Series Generator Set With Cat C7.1 Engine Fuel System - Prime
DE Series Generator Set With Cat C7.1 Engine Engine Oil and Filter - Change
DE Series Generator Set With Cat C7.1 Engine Engine Oil Level - Check
DE Series Generator Set With Cat C7.1 Engine Engine Mounts - Inspect
DE Series Generator Set With Cat C7.1 Engine Engine Crankcase Breather - Replace - If equipped
DE Series Generator Set With Cat C7.1 Engine Engine Air Cleaner Service Indicator - Inspect
390F Excavator Machine Systems Drift Reduction Valve (Stick) - Disassemble
3512C and 3516C Marine Auxiliary and Generator Set Engines Starting the Engine - Natural Gas
390F Excavator Machine Systems Drift Reduction Valve (Stick) - Assemble
3512C and 3516C Marine Auxiliary and Generator Set Engines Fluid Recommendations
390F Excavator Machine Systems Stick Cylinder - Remove and Install
XQC1600 Power Module Starting the Engine
C9 Engine For Caterpillar Built Machines Turbocharger - Disassemble
390F Excavator Machine Systems Stick - Remove and Install
3512C HD and 3516C HD IPP Rental Power Modules Coolant Level Is Low
G3306B Generator Sets Manual Stop Procedure
3512C HD and 3516C HD IPP Rental Power Modules Coolant Temperature Is High
XQC1600 Power Module General Maintenance Information