Engine Mounts - Inspect
Provjerite jesu li nosači motora oslabili i jesu li vijci zategnuti na propisani zatezni moment. Vibracije motora mogu biti uzrokovane sljedećim stanjima:
- Nepravilan položaj motora na nosačima
- Oslabljeni nosači motora
Svaki je oslabljeni nosač motora potrebno zamijeniti. Preporučene zatezne momente potražite u Posebnoj publikaciji, SENR3130, "Specifikacije zateznih momenata". Za više informacija pogledajte preporuke proizvođača originalne opreme (OEM).
Caterpillar Information System:
DE Series Generator Set With Cat C7.1 Engine Engine Crankcase Breather - Replace - If equipped
DE Series Generator Set With Cat C7.1 Engine Engine Air Cleaner Service Indicator - Inspect
DE Series Generator Set With Cat C7.1 Engine Engine Air Cleaner Element (Single Element) - Replace
DE Series Generator Set With Cat C7.1 Engine Engine - Clean
390F Excavator Machine Systems Gear Pump (Pilot) - Remove and Install
390F Excavator Machine Systems Bucket Linkage Bearings and Seals - Remove and Install
C175-16 Petroleum Engine System Overview
390F Excavator Machine Systems Bucket Linkage - Remove and Install
390F Excavator Machine Systems Bucket - Remove and Install
2014/11/06 An Improved Fastening Process for the Number Two Clutch Seal Housing is Used on Certain CX31 and CX35 Transmissions {3160}
C175-16 Petroleum Engines Electronic Control Module (ECM)
390F Excavator Machine Systems Duo-Cone Conventional Seals - Install
DE Series Generator Set With Cat C7.1 Engine Engine Oil Level - Check
DE Series Generator Set With Cat C7.1 Engine Engine Oil and Filter - Change
DE Series Generator Set With Cat C7.1 Engine Fuel System - Prime
DE Series Generator Set With Cat C7.1 Engine Fuel Injection Nozzles - Test/Exchange
DE Series Generator Set With Cat C7.1 Engine Fuel System Primary Filter/Water Separator - Drain
390F Excavator Machine Systems Drift Reduction Valve (Stick) - Remove and Install
390F Excavator Machine Systems Location of Components (Return System)
2014/03/14 New Generator Set Software Gp Is Now Available On Certain G3306B Genset Packages {1920, 4490, 7620}
3512C Oil Well Service Engines Maintenance Interval Schedule
C15 and C18 Engines for Caterpillar Built Machines Alternator Mounting
390F Excavator Machine Systems Drift Reduction Valve (Stick) - Disassemble
3512C and 3516C Marine Auxiliary and Generator Set Engines Starting the Engine - Natural Gas