Drift Reduction Valve (Stick) - Remove and Install
拆卸步骤
开始:
- 释放液压系统压力。
Show/hide table
| 注意 |
|---|
在进行检验、保养、测试、调整及维修产品期间，必须小心以确保装好排放出的油液。 在打开任何舱室或解体任何储有液体的部件之前，要准备好合适的容器收集液体。 有关收集和盛接 Cat 产品上油液的适用工具和用品，请参阅专门出版物, NENG2500, "代理商维修工具目录"。 按照当地法规和要求处置所有液体。 |
Show/hide table
 |
在工作温度下，液压油温度很高且处于压力下。 热机油能造成烫伤。 为避免可能的人身伤害，在断开或拆下任何液压管路或部件之前，请释放作业机具液压回路（动臂、斗杆、铲斗和回转机构）、行驶回路及液压油箱加注口盖处的压力。 仅当发动机停止并且加注口盖冷却到可以接触时方可拆下加注口盖。 |
- 排放液压油。 请参阅操作和保养手册, "液压系统油 - 更换"以了解正确的排放和加注步骤。
- 断开线束组件 (3) 。 拆下螺栓 (2) 和沉降阻尼阀 (1) 。
Show/hide table
 | |
| 图 1 | g03645782 |
安装步骤
- 按与拆卸相反的顺序安装沉降阻尼阀 (1) 。
Caterpillar Information System:
DE Series Generator Set With Cat C7.1 Engine Fuel System Primary Filter/Water Separator - Drain
DE Series Generator Set With Cat C7.1 Engine Fuel Injection Nozzles - Test/Exchange
DE Series Generator Set With Cat C7.1 Engine Fuel System - Prime
DE Series Generator Set With Cat C7.1 Engine Engine Oil and Filter - Change
DE Series Generator Set With Cat C7.1 Engine Engine Oil Level - Check
DE Series Generator Set With Cat C7.1 Engine Engine Mounts - Inspect
DE Series Generator Set With Cat C7.1 Engine Engine Crankcase Breather - Replace - If equipped
DE Series Generator Set With Cat C7.1 Engine Engine Air Cleaner Service Indicator - Inspect
DE Series Generator Set With Cat C7.1 Engine Engine Air Cleaner Element (Single Element) - Replace
DE Series Generator Set With Cat C7.1 Engine Engine - Clean
390F Excavator Machine Systems Gear Pump (Pilot) - Remove and Install
390F Excavator Machine Systems Bucket Linkage Bearings and Seals - Remove and Install
390F Excavator Machine Systems Location of Components (Return System)
2014/03/14 New Generator Set Software Gp Is Now Available On Certain G3306B Genset Packages {1920, 4490, 7620}
3512C Oil Well Service Engines Maintenance Interval Schedule
C15 and C18 Engines for Caterpillar Built Machines Alternator Mounting
390F Excavator Machine Systems Drift Reduction Valve (Stick) - Disassemble
3512C and 3516C Marine Auxiliary and Generator Set Engines Starting the Engine - Natural Gas
390F Excavator Machine Systems Drift Reduction Valve (Stick) - Assemble
3512C and 3516C Marine Auxiliary and Generator Set Engines Fluid Recommendations
390F Excavator Machine Systems Stick Cylinder - Remove and Install
XQC1600 Power Module Starting the Engine
C9 Engine For Caterpillar Built Machines Turbocharger - Disassemble
390F Excavator Machine Systems Stick - Remove and Install