Fuel System Primary Filter/Water Separator - Drain
Show/hide table
 |
|
Gorivo ispuušteno ili proliveno na zagrijane površine ili električne komponente može izazvati požar. Kako bi se izbjegle moguće ozljede treba isključiti prekidač za pokretanje kod zamjene filtera za gorivo ili uložaka separatora vode. Odmah očistiti proliveno gorivo. |
Show/hide table
| BILJEĊ KA |
|---|
|
Prije vršenja bilo kakvog servisiranja ili popravaka pobrinite se da je motor zaustavljen. |
Show/hide table
| BILJEĊ KA |
|---|
|
Separator vode može biti u stanju usisa tijekom normalnog rada motora. Pobrinite se da ispusni ventil bude dobro pritegnut kako biste spriječili da zrak prodre u sustav. |
- Stavite prikladnu posudu ispod separatora vode kako biste uhvatili gorivo koje bi se moglo proliti. Očistite proliveno gorivo.
Show/hide table
Ilustracija 1 g02351572 Tipičan primjer - Spojite prikladnu cijev na ispust (1). Otvorite ispust (1). Ispustite tekućinu u prikladnu posudu.
- Ispusni ventil (1) pritegnite samo rukom. Uklonite crijevo i ispuštenu tekućinu zbrinite na sigurno mjesto.
Caterpillar Information System:
DE Series Generator Set With Cat C7.1 Engine Fuel Injection Nozzles - Test/Exchange
DE Series Generator Set With Cat C7.1 Engine Fuel System - Prime
DE Series Generator Set With Cat C7.1 Engine Engine Oil and Filter - Change
DE Series Generator Set With Cat C7.1 Engine Engine Oil Level - Check
DE Series Generator Set With Cat C7.1 Engine Engine Mounts - Inspect
DE Series Generator Set With Cat C7.1 Engine Engine Crankcase Breather - Replace - If equipped
DE Series Generator Set With Cat C7.1 Engine Engine Air Cleaner Service Indicator - Inspect
DE Series Generator Set With Cat C7.1 Engine Engine Air Cleaner Element (Single Element) - Replace
DE Series Generator Set With Cat C7.1 Engine Engine - Clean
390F Excavator Machine Systems Gear Pump (Pilot) - Remove and Install
390F Excavator Machine Systems Bucket Linkage Bearings and Seals - Remove and Install
C175-16 Petroleum Engine System Overview
390F Excavator Machine Systems Drift Reduction Valve (Stick) - Remove and Install
390F Excavator Machine Systems Location of Components (Return System)
2014/03/14 New Generator Set Software Gp Is Now Available On Certain G3306B Genset Packages {1920, 4490, 7620}
3512C Oil Well Service Engines Maintenance Interval Schedule
C15 and C18 Engines for Caterpillar Built Machines Alternator Mounting
390F Excavator Machine Systems Drift Reduction Valve (Stick) - Disassemble
3512C and 3516C Marine Auxiliary and Generator Set Engines Starting the Engine - Natural Gas
390F Excavator Machine Systems Drift Reduction Valve (Stick) - Assemble
3512C and 3516C Marine Auxiliary and Generator Set Engines Fluid Recommendations
390F Excavator Machine Systems Stick Cylinder - Remove and Install
XQC1600 Power Module Starting the Engine
C9 Engine For Caterpillar Built Machines Turbocharger - Disassemble