Drift Reduction Valve (Stick) - Assemble
组装步骤
- 安装压力传感器 (2) 。 拧紧压力传感器 (2) 至扭矩为 62 ± 6 N·m (46 ± 4 lb ft)。
Show/hide table
 | |
| 图 1 | g03646116 |
- 安装阀芯 (3) 。 拧紧芯 (3) 至扭矩 78 ± 5 N·m (58 ± 4 lb ft)。
- 安装线圈组件 (4) 和螺母 (5) 。 拧紧螺母 (5) 至扭矩为 15.7 ± 1.6 N·m (138.9 ± 14.1 lb ft)。
End By: 安装沉降阻尼阀。
Caterpillar Information System:
3512C and 3516C Marine Auxiliary and Generator Set Engines Starting the Engine - Natural Gas
390F Excavator Machine Systems Drift Reduction Valve (Stick) - Disassemble
C15 and C18 Engines for Caterpillar Built Machines Alternator Mounting
3512C Oil Well Service Engines Maintenance Interval Schedule
2014/03/14 New Generator Set Software Gp Is Now Available On Certain G3306B Genset Packages {1920, 4490, 7620}
390F Excavator Machine Systems Location of Components (Return System)
390F Excavator Machine Systems Drift Reduction Valve (Stick) - Remove and Install
DE Series Generator Set With Cat C7.1 Engine Fuel System Primary Filter/Water Separator - Drain
DE Series Generator Set With Cat C7.1 Engine Fuel Injection Nozzles - Test/Exchange
DE Series Generator Set With Cat C7.1 Engine Fuel System - Prime
DE Series Generator Set With Cat C7.1 Engine Engine Oil and Filter - Change
DE Series Generator Set With Cat C7.1 Engine Engine Oil Level - Check
3512C and 3516C Marine Auxiliary and Generator Set Engines Fluid Recommendations
390F Excavator Machine Systems Stick Cylinder - Remove and Install
XQC1600 Power Module Starting the Engine
C9 Engine For Caterpillar Built Machines Turbocharger - Disassemble
390F Excavator Machine Systems Stick - Remove and Install
3512C HD and 3516C HD IPP Rental Power Modules Coolant Level Is Low
G3306B Generator Sets Manual Stop Procedure
3512C HD and 3516C HD IPP Rental Power Modules Coolant Temperature Is High
XQC1600 Power Module General Maintenance Information
3512C HD and 3516C HD IPP Rental Power Modules Coolant Temperature Is Low
390F Excavator Machine Systems Bucket Cylinder - Remove and Install
G3306B Generator Sets Control Panel - Inspect/Test