Solenoid Valve (DEF Return) - Remove and Install
Show/hide table
NOTICE |
---|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products. Dispose of all fluids according to local regulations and mandates. |
- Turn off the diesel exhaust fluid supply to the dosing cabinet.
- Turn off the power supply to the dosing cabinet.
- Wait 30 seconds, then turn off the air supply to the dosing cabinet.
Show/hide table
Illustration 1 g03499661 - Remove panel (1).
Show/hide table
Illustration 2 g03499663 - Disconnect harness assembly (2).
Show/hide table
Illustration 3 g03499665 - Remove cable strap (3).
- Remove solenoid (4).
- Remove O-ring seals (5) and (6).
Show/hide table
Illustration 4 | g03499670 |
- Install solenoid (4) in the reverse order of removal.
- Tighten solenoid (4) to a torque of
60 ± 5 N·m (44 ± 4 lb ft) .
- Tighten solenoid (4) to a torque of
Caterpillar Information System:
C280-08 Tier 4 Engine Pressure Sensor (Diesel Exhaust Fluid) - Remove and Install
2013/11/04 New Ferrite Bead and Relay Harness Is Now Available For Certain Generator Sets Equipped With PL421 {4450, 7606}
2013/10/25 Machine Engine ECM Clearing Process for Dealers Is Now Available on Certain Applications {1901, 1920}
C280-08 Tier 4 Engine Solenoid Valve (DEF Air) - Remove and Install
C280-08 Tier 4 Engine Regulator (DEF Air) - Remove and Install
2013/10/28 Engine ECM Clearing Process for Dealers Is Now Available on Certain Applications {1901, 1920}
14L Motor Grader Air Cleaner - Remove and Install
C280-08 Marine Engine General Hazard Information
C280-08 Marine Engine Burn Prevention
C280-08 Marine Engine Mounting and Dismounting
C280-08 Marine Engine Before Starting Engine
C280-08 Marine Engine Alarms and Shutoffs
C27 and C32 Engines for Caterpillar Built Machines Engine Overspeeds
C8.7 and C12.9 Marine Engines Engine Vibration Is Excessive
C7 and C9 Industrial Engines Exhaust Has Excessive Black Smoke
C7 and C9 Industrial Engines Power Is Intermittently Low or Power Cutout Is Intermittent
374F Excavator Machine System Engine Mounting
C4.4 Industrial Engine Engine Oil and Filter - Change
C280-08 Tier 4 Engine Pressure Sensor (DEF Air) - Remove and Install
G3600 A4 Engines System Overview
374F Excavator Machine Systems Overload Warning - Set - If Equipped
G3600 A4 Engines Electrical Connectors
G3600 A4 Engines Diagnostic Trouble Codes
C280-08 Tier 4 Engine Manifold (Diesel Exhaust Fluid) - Remove and Install