Exhaust Has Excessive Black Smoke
Check for the following problems if there is excessive black exhaust smoke.
- Air inlet or exhaust system
- Atmospheric pressure sensor
- Flash file
- Fuel quality
- Valve adjustment
Show/hide table
Troubleshooting Test Steps | Values | Results |
---|---|---|
1. Air Inlet or Exhaust System A. Check the air inlet system for restrictions and/or for leaks. B. Check for an air filter restriction. C. Perform a visual inspection of the system for restrictions and/or for leaks in the air inlet piping. D. Ensure that the turbocharger is in good repair. E. Check the exhaust system for restrictions. |
Air Inlet or Exhaust System |
Result: There are no signs of damage or failure in the air inlet or exhaust system. Proceed to Test Step 2. Result: There are signs of damage or failure in the air inlet or exhaust system. Repair: Repair the air inlet or exhaust system. |
2. Atmospheric Pressure Sensor A. Remove the sensor. B. Remove debris, moisture, or ice from the sensor. C. Install the sensor. D. Check the Caterpillar Electronic Technician (ET) for active diagnostic codes on the sensor. If no active diagnostic code exists, the sensor may be used. The correct reading for the atmospheric pressure is between |
Atmospheric Pressure Sensor |
Result: There are no codes present for the Atmospheric Pressure Sensor. Proceed to Test Step 3. Result: There are codes present for the Atmospheric Pressure Sensor. Repair: Troubleshoot the codes before continuing with this procedure. |
3. Flash File A. Verify that the latest flash file is installed. Refer to Troubleshooting, "ECM Software - Install" for information. |
Flash File |
Result: The latest flash file is installed. Proceed to Test Step 4. Result The latest flash file is not installed. Repair: Install the correct flash file. Verify that the problem has been resolved. |
4. Fuel Quality A. Cold weather adversely affects the characteristics of the fuel. Refer to Operation and Maintenance Manual for information on improving the characteristics of the fuel during cold-weather operation. |
Fuel Quality |
Result The fuel quality is within the engine specifications. Proceed to Test Step 5. Result The fuel quality is not within the engine specifications. Repair: Replace the fuel with fuel that is within the engine specifications. Verify that the problem has been resolved. |
5. Valve Adjustment A. Check the valve adjustment. Refer to Systems Operation/Testing and Adjusting for information that is related to valve adjustments. |
Valve Adjustment |
Result The valve adjustment is not within engine specifications. Repair: Make the appropriate adjustment. Verify that the problem has been resolved. |
Caterpillar Information System:
C8.7 and C12.9 Marine Engines Engine Vibration Is Excessive
C27 and C32 Engines for Caterpillar Built Machines Engine Overspeeds
C280-08 Tier 4 Engine Solenoid Valve (DEF Return) - Remove and Install
C280-08 Tier 4 Engine Pressure Sensor (Diesel Exhaust Fluid) - Remove and Install
2013/11/04 New Ferrite Bead and Relay Harness Is Now Available For Certain Generator Sets Equipped With PL421 {4450, 7606}
2013/10/25 Machine Engine ECM Clearing Process for Dealers Is Now Available on Certain Applications {1901, 1920}
C280-08 Tier 4 Engine Solenoid Valve (DEF Air) - Remove and Install
C280-08 Tier 4 Engine Regulator (DEF Air) - Remove and Install
2013/10/28 Engine ECM Clearing Process for Dealers Is Now Available on Certain Applications {1901, 1920}
14L Motor Grader Air Cleaner - Remove and Install
C280-08 Marine Engine General Hazard Information
C280-08 Marine Engine Burn Prevention
C7 and C9 Industrial Engines Power Is Intermittently Low or Power Cutout Is Intermittent
374F Excavator Machine System Engine Mounting
C4.4 Industrial Engine Engine Oil and Filter - Change
C280-08 Tier 4 Engine Pressure Sensor (DEF Air) - Remove and Install
G3600 A4 Engines System Overview
374F Excavator Machine Systems Overload Warning - Set - If Equipped
G3600 A4 Engines Electrical Connectors
G3600 A4 Engines Diagnostic Trouble Codes
C280-08 Tier 4 Engine Manifold (Diesel Exhaust Fluid) - Remove and Install
C280-08 Tier 4 Engine Solenoid Valve (DEF Supply) - Remove and Install
2013/12/10 Improved Engine Harness and Sensor Harness Assemblies Are Used on C175 Commercial Engines {1408, 1408}
C280-12 Marine Engine Product Description