Solenoid Valve (DEF Supply) - Remove and Install
Show/hide table
NOTICE |
---|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products. Dispose of all fluids according to local regulations and mandates. |
- Turn off the diesel exhaust fluid supply to the dosing cabinet.
- Turn off the power supply to the dosing cabinet.
- Wait 30 seconds, then turn off the air supply to the dosing cabinet.
Show/hide table
Illustration 1 g03499661 - Remove panel (1).
Show/hide table
Illustration 2 g03501538 - Disconnect harness assembly (3).
- Remove cable strap (4).
- Remove solenoid (2).
Show/hide table
Illustration 3 g03501578 - Remove O-ring seals (5) and (6).
- Install solenoid (2) in the reverse order of removal.
- Tighten solenoid (2) to a torque of
60 ± 5 N·m (44 ± 4 lb ft) .
- Tighten solenoid (2) to a torque of
Caterpillar Information System:
C280-08 Tier 4 Engine Manifold (Diesel Exhaust Fluid) - Remove and Install
G3600 A4 Engines Diagnostic Trouble Codes
G3600 A4 Engines Electrical Connectors
374F Excavator Machine Systems Overload Warning - Set - If Equipped
G3600 A4 Engines System Overview
C280-08 Tier 4 Engine Pressure Sensor (DEF Air) - Remove and Install
C4.4 Industrial Engine Engine Oil and Filter - Change
374F Excavator Machine System Engine Mounting
C7 and C9 Industrial Engines Power Is Intermittently Low or Power Cutout Is Intermittent
C7 and C9 Industrial Engines Exhaust Has Excessive Black Smoke
C8.7 and C12.9 Marine Engines Engine Vibration Is Excessive
C27 and C32 Engines for Caterpillar Built Machines Engine Overspeeds
2013/12/10 Improved Engine Harness and Sensor Harness Assemblies Are Used on C175 Commercial Engines {1408, 1408}
C280-12 Marine Engine Product Description
C280-08 Tier 4 Engine Liquid Level Sensor (DEF) - Remove and Install
C280-08 Tier 4 Engine Filter Screen (Air) - Remove and Install
374F Excavator Machine System Swivel and Mounting
C280-12 Marine Engine Alarms and Shutoffs
C280-08 Marine Engine Diesel Exhaust Fluid in Cold Weather
C280-12 Marine Engine Refill Capacities
374F Excavator Machine System Swing Cushion Valve
C280-16 Marine Engines Engine Air Cleaner Element (Single Element) - Inspect/Replace
C280 Marine and Petroleum Engines Exhaust Bypass Valve - Adjust
14L Motor Grader Ignition Coil - Remove and Install - CEM