Diesel Particulate Filter - Clean/Inspect
Show/hide table
Illustration 1 | g03670117 |
(1) Hatch (2) DPF catalysts |
Show/hide table
Illustration 2 | g03689775 |
Cleaning the DPF Catalysts
The catalyst should be cleaned if a loss in emissions reduction or an increase in back pressure becomes excessive. A rise in temperature may indicate a need to clean the catalyst. The contamination in the exhaust stream will determine the schedule for cleaning.
Note: Prior to removal of the catalyst, identify the position of the catalysts and airflow direction. Ensure that the catalyst part number position and the air flow direction remain the same.
Cleaning the Diesel Particulate Filter (DPF)
Consult your local Cat Dealer for information on cleaning the DPF.
Caterpillar Information System:
Retrofit Diesel Particulate Filter (DPF) Systems Glossary
EMCP4.1/EMCP4.2 Integrated Voltage Regulator
Retrofit SCR Aftertreatment Catalyst (SCR) - Replace
C18 Petroleum Engine Monitoring System
C18 Petroleum Engine Gauges and Indicators
14L Motor Grader Machine Systems Centershift Lock Bar and Bushings - Remove
CX31-P600 Petroleum Transmission Maintenance Interval Schedule
C18 Petroleum Engine Product Description
14L Motor Grader Machine Systems Centershift Lock Bar and Bushings - Install
Bench Test Procedure for a CX31 On Highway Truck or AD22 Articulated Truck Transmission {3030, 3073} Bench Test Procedure for a CX31 On Highway Truck or AD22 Articulated Truck Transmission {3030, 3073}
Disassembly and Assembly Procedure for 3N-8891 Sea Water Heat Exchanger Gp {1379} Disassembly and Assembly Procedure for 3N-8891 Sea Water Heat Exchanger Gp {1379}
3512B and 3516B Generator Set Engines with Dynamic Gas Blending Air Inlet and Exhaust Lines
Retrofit SCR Aftertreatment Exhaust Inlet Nitrogen Oxide Sensor - Inspect/Replace
Retrofit SCR Aftertreatment Exhaust Outlet Nitrogen Oxide Sensor - Inspect/Replace
Retrofit SCR Aftertreatment Catalyst (DOC) - Replace
Retrofit SCR Aftertreatment Diesel Particulate Filter - Replace
2013/11/21 New Engine Software is Now Used on Certain C32 Marine Engines {1901, 1920}
3512B and 3516B Generator Set Engines with Dynamic Gas Blending Air Inlet and Exhaust Lines
3512B and 3516B Generator Set Engines with Dynamic Gas Blending Air Inlet and Exhaust Lines
C4.4 Industrial Engine Coolant (Commercial Heavy-Duty) - Change
C4.4 and C7.1 Engines Fuel Rail Pressure Problem
C7 Petroleum Engine Product Description
C7 Petroleum Engine Refill Capacities
C7 Petroleum Engine Fluid Recommendations