Exhaust Inlet Nitrogen Oxide Sensor - Inspect/Replace
Show/hide table
Illustration 1 | g03670121 |
Note: During installation, inspection, and handling of the sensor, follow the parameters listed below:
Note: Turn off power supply before disconnecting or connecting the NOx sensor.
- Inspect the harness for damaged wiring
- Inspect for secure connections at all ends of the harness
To replace the NOx sensor, follow the steps listed below:
- Disconnect harness assembly and disconnect sensor cabling.
- Remove NOx sensor probe.
- Install inlet NOx sensor probe. Take precautions to prevent damaging the ceramic sensor element (4) when installing.
Show/hide table
Illustration 2 | g02715050 |
- Ensure that the sensor is securely mounted.
- Connect harness assembly and cabling.
- Install cover plate assemblies and bolts. Refer to Specifications, SENR3130, "Torque Specifications" for the proper torque.
Caterpillar Information System:
Retrofit SCR Aftertreatment Diesel Particulate Filter - Clean/Inspect
Retrofit Diesel Particulate Filter (DPF) Systems Glossary
EMCP4.1/EMCP4.2 Integrated Voltage Regulator
Retrofit SCR Aftertreatment Catalyst (SCR) - Replace
C18 Petroleum Engine Monitoring System
C18 Petroleum Engine Gauges and Indicators
14L Motor Grader Machine Systems Centershift Lock Bar and Bushings - Remove
CX31-P600 Petroleum Transmission Maintenance Interval Schedule
C18 Petroleum Engine Product Description
14L Motor Grader Machine Systems Centershift Lock Bar and Bushings - Install
Bench Test Procedure for a CX31 On Highway Truck or AD22 Articulated Truck Transmission {3030, 3073} Bench Test Procedure for a CX31 On Highway Truck or AD22 Articulated Truck Transmission {3030, 3073}
Disassembly and Assembly Procedure for 3N-8891 Sea Water Heat Exchanger Gp {1379} Disassembly and Assembly Procedure for 3N-8891 Sea Water Heat Exchanger Gp {1379}
Retrofit SCR Aftertreatment Exhaust Outlet Nitrogen Oxide Sensor - Inspect/Replace
Retrofit SCR Aftertreatment Catalyst (DOC) - Replace
Retrofit SCR Aftertreatment Diesel Particulate Filter - Replace
2013/11/21 New Engine Software is Now Used on Certain C32 Marine Engines {1901, 1920}
3512B and 3516B Generator Set Engines with Dynamic Gas Blending Air Inlet and Exhaust Lines
3512B and 3516B Generator Set Engines with Dynamic Gas Blending Air Inlet and Exhaust Lines
C4.4 Industrial Engine Coolant (Commercial Heavy-Duty) - Change
C4.4 and C7.1 Engines Fuel Rail Pressure Problem
C7 Petroleum Engine Product Description
C7 Petroleum Engine Refill Capacities
C7 Petroleum Engine Fluid Recommendations
XQC1600 Power Module Plate Locations and Film Locations