3512B and 3516B Generator Set Engines with Dynamic Gas Blending Caterpillar


Air Inlet and Exhaust Lines

Usage:

3516B DGP


Illustration 1g03485257

Table 1
Specification for 430-4455 Air Lines Gp and 448-3419 Air Lines Gp 
Item  Qty  Part  Specification Description 
2K-4973 Locknut  Torque to 15 ± 2 N·m (133 ± 18 lb in)
321-5895 Shield As  During installation, do not crush the shield assembly. 
Install the shield assembly with the springs and hooks at the top of the hose as shown in Illustration 1.

Caterpillar Information System:

C18 Petroleum Engine Maintenance Interval Schedule
C4.4 Industrial Engine Belt - Inspect
3512B and 3516B Generator Set Engines with Dynamic Gas Blending Air Inlet and Exhaust Lines
C4.4 Industrial Engine Belt Tensioner - Check
2013/10/21 Recommendations For Parameters and Update Rates On PL1000T For Certain C32, 3500, and G3500 Engines {1926}
UPS 300, UPS 301, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supplies Electrical Connections
C13 and C15 Generator Sets Safety Messages
320D2 Excavator Machine Electronic Control System Diagnostic Capabilities
308E2 CR Mini Hydraulic Excavator Final Drive Oil Sample - Obtain
308E2 CR Mini Hydraulic Excavator Final Drive Oil Level - Check
308E2 CR Mini Hydraulic Excavator Final Drive Oil - Change
2013/12/05 New Engine Software Is Used On Certain 3516C Engines {1920}
Disassembly and Assembly Procedure for 3N-8891 Sea Water Heat Exchanger Gp {1379} Disassembly and Assembly Procedure for 3N-8891 Sea Water Heat Exchanger Gp {1379}
Bench Test Procedure for a CX31 On Highway Truck or AD22 Articulated Truck Transmission {3030, 3073} Bench Test Procedure for a CX31 On Highway Truck or AD22 Articulated Truck Transmission {3030, 3073}
14L Motor Grader Machine Systems Centershift Lock Bar and Bushings - Install
C18 Petroleum Engine Product Description
CX31-P600 Petroleum Transmission Maintenance Interval Schedule
14L Motor Grader Machine Systems Centershift Lock Bar and Bushings - Remove
C18 Petroleum Engine Gauges and Indicators
C18 Petroleum Engine Monitoring System
Retrofit SCR Aftertreatment Catalyst (SCR) - Replace
EMCP4.1/EMCP4.2 Integrated Voltage Regulator
Retrofit Diesel Particulate Filter (DPF) Systems Glossary
Retrofit SCR Aftertreatment Diesel Particulate Filter - Clean/Inspect
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.