New Engine Software Is Used On Certain 3516C Engines {1920}
- Engine:
- 3516C (S/N: TTD1-UP; PAG1-UP; TTH1-UP; TTJ1-UP; E3Z1-UP; BG31-UP)
Description of Change: The new engine software has improved oil filter differential pressure reading.
Adaptable To: The new engine software listed in Table 1 is adaptable back to first production of the serial numbers listed above. Refer to Table 2 for the effective serial numbers.
Show/hide table
Prefix     | New Software Part No.     | Former Software Part No.     |
---|---|---|
TTH     | 432-6853     | 367-7575     |
432-6941 | 417-0046     | |
432-6945 | 417-0050     | |
PAG     | 432-6855     | 367-7577     |
TTJ     | 432-6857     | 367-7579     |
TTD     | 432-6873     | 416-9974     |
E3Z     | 432-6875     | 416-9976     |
BG3     | 432-6949     | 417-0056     |
Show/hide table
Effectivity     |
---|
S/N:TTH00551-UP     |
S/N:PAG00483-UP     |
S/N:TTJ00478-UP     |
S/N:TTD00415-UP     |
S/N:E3Z00206-UP     |
S/N:BG300103-UP     |
Caterpillar Information System:
C13 and C15 Generator Sets Model View Illustrations
320D2 Excavator Machine Electronic Control System Connector Locations
320D2 Excavator Machine Electronic Control System Service Tools
308E2 CR and 308E2 SR Mini Hydraulic Excavators High Pressure Fuel Lines
2013/10/17 The Water Temperature Regulator Housing Has Been Improved for Certain C13 Engines {1355, 1393}
C18 Marine Engines Refill Capacities
3500 Engines Flywheel Housing
G3306B Petroleum Generator Set Engines Timing - Calibrate
3512B and 3516B Generator Set Engines with Dynamic Gas Blending Fuel Filter
3512B and 3516B Generator Set Engines with Dynamic Gas Blending Engine Oil Filter
3512B and 3516B Generator Set Engines with Dynamic Gas Blending Water Connection Group
CX31-P600 Petroleum Transmission Speed Sensor (Engine) (Torque Converter Output)
308E2 CR Mini Hydraulic Excavator Final Drive Oil - Change
308E2 CR Mini Hydraulic Excavator Final Drive Oil Level - Check
308E2 CR Mini Hydraulic Excavator Final Drive Oil Sample - Obtain
320D2 Excavator Machine Electronic Control System Diagnostic Capabilities
C13 and C15 Generator Sets Safety Messages
UPS 300, UPS 301, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supplies Electrical Connections
2013/10/21 Recommendations For Parameters and Update Rates On PL1000T For Certain C32, 3500, and G3500 Engines {1926}
C4.4 Industrial Engine Belt Tensioner - Check
3512B and 3516B Generator Set Engines with Dynamic Gas Blending Air Inlet and Exhaust Lines
C4.4 Industrial Engine Belt - Inspect
C18 Petroleum Engine Maintenance Interval Schedule
3512B and 3516B Generator Set Engines with Dynamic Gas Blending Air Inlet and Exhaust Lines