New Software is Available for Certain Retrofit Selective Catalytic Reduction Systems (SCR) {1900, 1901, 1920}
- Retrofit Aftertreatment:
- SCR (S/N: ES71-UP)
Introduction
New software is available for retrofit Selective Catalytic Reduction (SCR) systems that are equipped with 376-8435 Control Module As. This controller is used with closed loop land-based systems. The new software version 6.0.9 is effective with ES700323 SCR systems. Installation requires Deployment Tool software that is exclusively used for select retrofit SCR systems.
The new software feature includes the activation of a modbus feature that allows data streaming for remote monitoring.
At this time the software is not available through the Service Information System (SIS). If you need assistance, contact a Service Engineer in Caterpillar Emissions Solutions or call the service hotline at (877) 228-0909.
Caterpillar Information System:
C18 Generator Set Refill Capacities
PM820, PM822, and PM825 Cold Planer Rotor Bearing Oil Sample - Obtain
2014/12/23 A New Outlet Elbow Is Used on Certain Machine Engines {1307}
2013/10/28 A New Outlet Elbow Is Available for Certain Commercial Engines {1307}
374F and 390F Excavators and 390F MHPU Mobile Hydraulic Power Unit Sensor Signal (Analog, Passive) - Test
374F and 390F Excavators and 390F MHPU Mobile Hydraulic Power Unit CAN Data Link - Test
2013/11/08 New Oil Heater Circulation Pumps and Seal Kits Are Available for Certain 3600 and C280 Engines {1333}
2014/08/01 A New Oil Screen is Used on the High-Pressure Fuel Pump Adapter on C175 Engines {1151, 1162, 1206}
G3306B Gas Engines Catalytic Converter
G3306B Gas Engines Temperature Sensor (Catalyst Outlet)
CG137-12 Petroleum Generator Set Engine Inlet Manifold Air Pressure Sensor
G3306B Gas Engines Cylinder Liner
C8.7 Marine Engine Engine Oil Level - Check
C12.9 Marine Engines Engine Oil and Filter - Change
Disassembly, Assembly, and Installation of the Oil Heater Pumps and Seals for Certain 3600 and C280 Engines{1333} Disassembly, Assembly, and Installation of the Oil Heater Pumps and Seals for Certain 3600 and C280 Engines{1333}
307, 308, 309 and 310 EXCAVATOR Boom
Using the 223-2105 Hose Cutting Machine{0374, 0599, 0678, 0684, 0708, 0738, 5057, 6060} Using the 223-2105 Hose Cutting Machine{0374, 0599, 0678, 0684, 0708, 0738, 5057, 6060}
2014/07/18 A New Outlet Elbow Is Available for Certain Truck Engines {1307}
C12.9 Marine Engines Fuel System Primary Filter/Water Separator - Drain
Crimping XT-3 ES and XT-5 S4G, MCSH, and MCSX Couplings Using 4C-3660, 4C-5052, 4C-5053, 9U-5792, or 9U-7261 Hose Machines{0374, 0599, 0684, 0738, 5057} Crimping XT-3 ES and XT-5 S4G, MCSH, and MCSX Couplings Using 4C-3660, 4C-5052, 4C-5053, 9U-5792, or 9U-7261 Hose Machines{0374, 0599, 0684, 0738, 5057}
C12.9 Marine Engines Fumes Disposal Filter Element - Replace - External
C13 and C15 Generator Sets Single Unit Operation
C8.7 Marine Engine Heat Exchanger - Clean/Test
C9 Generator Set Voltage Regulators