C8.7 Marine Engine Caterpillar


Engine Oil Level - Check

Usage:

C8.7 CS7


Ilustrasi 1g06005981
Tampilan sisi kanan Engine Kapal Laut C12.9
(1) Filter oli engine
(2) Meteran tingkat oli engine


Ilustrasi 2g06005989
Tampilan sisi kiri Engine Kapal Laut C12.9
(1) Filter oli engine
(2) Meteran tingkat oli engine

Periksa tingkat oli setelah engine berhenti.



Ilustrasi 3g00110310
(Y) "ADD/MIN" (Tambah/Minimum) tanda
(X) Tanda "FULL/MAX" (Penuh/Maksimum)

  1. Pertahankan tingkat oli di antara tanda "ADD/MIN" (Y) dan tanda "FULL/MAX" (X) pada pengukur tingkat oli. Jangan isi karter di atas tanda "FULL/MAX" (X).


    PERHATIAN

    Mengoperasikan engine saat tingkat oli berada di atas tanda "FULL" (Penuh) dapat menyebabkan crankshaft terendam dalam oli. Terbentuknya gelembung udara akibat terendamnya crankshaft dalam oli akan mengurangi karakteristik pelumasan oli dan dapat mengakibatkan kehilangan daya atau kegagalan engine.


  2. Lepaskan tutup pengisian oli dan tambahkan oli, bila perlu. Bersihkan tutup pengisian oli. Pasang kembali tutup pengisian oli.

Caterpillar Information System:

2013/10/01 New Software is Available for Certain Retrofit Selective Catalytic Reduction Systems (SCR) {1900, 1901, 1920}
C18 Generator Set Refill Capacities
PM820, PM822, and PM825 Cold Planer Rotor Bearing Oil Sample - Obtain
2014/12/23 A New Outlet Elbow Is Used on Certain Machine Engines {1307}
2013/10/28 A New Outlet Elbow Is Available for Certain Commercial Engines {1307}
374F and 390F Excavators and 390F MHPU Mobile Hydraulic Power Unit Sensor Signal (Analog, Passive) - Test
374F and 390F Excavators and 390F MHPU Mobile Hydraulic Power Unit CAN Data Link - Test
2013/11/08 New Oil Heater Circulation Pumps and Seal Kits Are Available for Certain 3600 and C280 Engines {1333}
2014/08/01 A New Oil Screen is Used on the High-Pressure Fuel Pump Adapter on C175 Engines {1151, 1162, 1206}
G3306B Gas Engines Catalytic Converter
G3306B Gas Engines Temperature Sensor (Catalyst Outlet)
CG137-12 Petroleum Generator Set Engine Inlet Manifold Air Pressure Sensor
C12.9 Marine Engines Engine Oil and Filter - Change
Disassembly, Assembly, and Installation of the Oil Heater Pumps and Seals for Certain 3600 and C280 Engines{1333} Disassembly, Assembly, and Installation of the Oil Heater Pumps and Seals for Certain 3600 and C280 Engines{1333}
307, 308, 309 and 310 EXCAVATOR Boom
Using the 223-2105 Hose Cutting Machine{0374, 0599, 0678, 0684, 0708, 0738, 5057, 6060} Using the 223-2105 Hose Cutting Machine{0374, 0599, 0678, 0684, 0708, 0738, 5057, 6060}
2014/07/18 A New Outlet Elbow Is Available for Certain Truck Engines {1307}
C12.9 Marine Engines Fuel System Primary Filter/Water Separator - Drain
Crimping XT-3 ES and XT-5 S4G, MCSH, and MCSX Couplings Using 4C-3660, 4C-5052, 4C-5053, 9U-5792, or 9U-7261 Hose Machines{0374, 0599, 0684, 0738, 5057} Crimping XT-3 ES and XT-5 S4G, MCSH, and MCSX Couplings Using 4C-3660, 4C-5052, 4C-5053, 9U-5792, or 9U-7261 Hose Machines{0374, 0599, 0684, 0738, 5057}
C12.9 Marine Engines Fumes Disposal Filter Element - Replace - External
C13 and C15 Generator Sets Single Unit Operation
C8.7 Marine Engine Heat Exchanger - Clean/Test
C9 Generator Set Voltage Regulators
TA2 Inspection for C7.1 Industrial Engine{0372, 1000, 7000, 753T, 7565} TA2 Inspection for C7.1 Industrial Engine{0372, 1000, 7000, 753T, 7565}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.