C12.9 Marine Engines Caterpillar


Fumes Disposal Filter Element - Replace - External

Usage:

C12.9 PC7
Opomba Motor ima dva vložka filtra za odvajanje hlapov. Zunanji filter je treba zamenjati ob navedenem intervalu. Notranji/centrifugalni filter je treba zamenjati ob vsaki drugi zamenjavi zunanjega filtra.

Sistem za odvajanje hlapov zahteva zamenjavo filtra za odvajanje hlapov. Na servisni interval filtra za odvajanje hlapov vplivajo naslednji elementi:

  • obremenitev motorja,

  • koncentracija saj,

  • stanje motorja.

------ OPOZORILO! ------

Vroče olje in vroče komponente lahko povzročijo telesne poškodbe. Pazite, da vroče olje ali vroče komponente ne pridejo v stik s kožo.



OBVESTILO

Med postopki preverjanja, vzdrževanja, preizkušanja, nastavitev in popravil je treba preprečiti razlivanje tekočin. Preden odprete kakršen koli predel ali razstavite komponento, ki vsebuje tekočino, pripravite ustrezno posodo za izliv tekočine.

Glejte Posebno publikacijo, NENG2500, "Cat Dealer Service Tool Catalog" ali Posebno publikacijo, PECJ0003, "Cat Shop Supplies and Tools Catalog" za informacije o orodjih in pripomočkih, primernih za zbiranje in shranjevanje tekočin iz strojev Cat.

Z odpadnimi tekočinami ravnajte v skladu z lokalnimi okoljevarstvenimi predpisi.




Slika 1g06010630

  1. Odstranite sklop pokrova (1).

  2. Odstranite filtrski vložek.

  3. Zamenjajte filtrski vložek.

  4. Namestite sklop pokrova.

Caterpillar Information System:

Crimping XT-3 ES and XT-5 S4G, MCSH, and MCSX Couplings Using 4C-3660, 4C-5052, 4C-5053, 9U-5792, or 9U-7261 Hose Machines{0374, 0599, 0684, 0738, 5057} Crimping XT-3 ES and XT-5 S4G, MCSH, and MCSX Couplings Using 4C-3660, 4C-5052, 4C-5053, 9U-5792, or 9U-7261 Hose Machines{0374, 0599, 0684, 0738, 5057}
C12.9 Marine Engines Fuel System Primary Filter/Water Separator - Drain
2014/07/18 A New Outlet Elbow Is Available for Certain Truck Engines {1307}
Using the 223-2105 Hose Cutting Machine{0374, 0599, 0678, 0684, 0708, 0738, 5057, 6060} Using the 223-2105 Hose Cutting Machine{0374, 0599, 0678, 0684, 0708, 0738, 5057, 6060}
307, 308, 309 and 310 EXCAVATOR Boom
Disassembly, Assembly, and Installation of the Oil Heater Pumps and Seals for Certain 3600 and C280 Engines{1333} Disassembly, Assembly, and Installation of the Oil Heater Pumps and Seals for Certain 3600 and C280 Engines{1333}
C12.9 Marine Engines Engine Oil and Filter - Change
C8.7 Marine Engine Engine Oil Level - Check
2013/10/01 New Software is Available for Certain Retrofit Selective Catalytic Reduction Systems (SCR) {1900, 1901, 1920}
C18 Generator Set Refill Capacities
PM820, PM822, and PM825 Cold Planer Rotor Bearing Oil Sample - Obtain
2014/12/23 A New Outlet Elbow Is Used on Certain Machine Engines {1307}
C13 and C15 Generator Sets Single Unit Operation
C8.7 Marine Engine Heat Exchanger - Clean/Test
C9 Generator Set Voltage Regulators
TA2 Inspection for C7.1 Industrial Engine{0372, 1000, 7000, 753T, 7565} TA2 Inspection for C7.1 Industrial Engine{0372, 1000, 7000, 753T, 7565}
C8.7 Marine Engine Model View Illustrations
3600 and C280 Diesel Engine Fluids Recommendations Contamination Control
C8.7 Marine Engine Product Description
CX31 and CX31 HT On-Highway Transmissions (Cat Truck) Relief Valve (Transmission Hydraulic Control)
C8.7 Marine Engine Refill Capacities
C15 and C18 Engines for Caterpillar Built Machines Injector Trim File - Install
C15 and C18 Engines for Caterpillar Built Machines Diagnostic Capabilities
793F and 793F CMD Off-Highway Truck Braking System Valve (Unloader)
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.