Cylinder Liner
Show/hide table
Illustration 1 | g03454339 |
Show/hide table
Specification for 371-5941 Cylinder Liner     | |||
Item     | Qty     | Part     | Specification Description     |
-     | Refer to the Reuse And Salvage Guidelines, SEBF8049 or refer to the Guideline for Reusable Parts and Salvage Operations, SEBF8068 for more information on pistons and cylinder liners.     | ||
A     | -     | -     | Bore in the new cylinder liner is 120.675 ± 0.037 mm (4.7510 ± 0.0015 inch).     |
B     | -     | -     | Thickness of the flange on the cylinder liner is 10.282 ± 0.020 mm (0.4048 ± 0.0008 inch).     |
1     | 6     | 2W-6134 Filler Band     | Use the following procedure to install the cylinder liner: 1. Before installation, Apply liquid soap to the liner bore surfaces of the cylinder block and to the O-ring seals to cylinder liner. 2. Dip the filler band completely in clean engine oil for a moment. 3. Install filler band in the groove under the liner flange immediately. 4. Install the cylinder liner in the cylinder block immediately before the filler band expands.     |
2     | 18     | 5S-6670 O-Ring Seal     |
Caterpillar Information System:
G3306B Gas Engines Crankshaft Wear Sleeves and Seals
G3306B Gas Engines Electric Starting Motor
G3306B Gas Engines Wiring
794 AC Off-Highway Truck Coolant Level - Check
C7 and C9 Industrial Engines Coolant Level Is Low
C15 and C18 Engines for Caterpillar Built Machines ECM Software - Install
C13, C15, and C18 Tier 4 Final Engines Electrical Connectors - Inspect
C15 and C18 Engines for Caterpillar Built Machines Timing - Calibrate
C15 and C18 Engines for Caterpillar Built Machines Customer Passwords
374F and 390F Excavators Tool Control System Switches
2014/12/10 New Software Is Now Available for All Cat® Products With The Product Link PL421 or Product Link PL420 System {7606, 7620}
2013/10/01 Recommended Capacitor As for All UPSB 125/UPSB 130 Uninterruptible Power Supply {1562, 4480}
CG137-12 Petroleum Generator Set Engine Inlet Manifold Air Pressure Sensor
G3306B Gas Engines Temperature Sensor (Catalyst Outlet)
G3306B Gas Engines Catalytic Converter
2014/08/01 A New Oil Screen is Used on the High-Pressure Fuel Pump Adapter on C175 Engines {1151, 1162, 1206}
2013/11/08 New Oil Heater Circulation Pumps and Seal Kits Are Available for Certain 3600 and C280 Engines {1333}
374F and 390F Excavators and 390F MHPU Mobile Hydraulic Power Unit CAN Data Link - Test
374F and 390F Excavators and 390F MHPU Mobile Hydraulic Power Unit Sensor Signal (Analog, Passive) - Test
2013/10/28 A New Outlet Elbow Is Available for Certain Commercial Engines {1307}
2014/12/23 A New Outlet Elbow Is Used on Certain Machine Engines {1307}
PM820, PM822, and PM825 Cold Planer Rotor Bearing Oil Sample - Obtain
C18 Generator Set Refill Capacities
2013/10/01 New Software is Available for Certain Retrofit Selective Catalytic Reduction Systems (SCR) {1900, 1901, 1920}