Flywheel Housing
Show/hide table
| |
| Illustration 1 | g03412907 |
Show/hide table
| Specification for 431-1049 Flywheel Housing Gp | |||
| Item | Qty | Part | Specification Description |
| Before installation of the flywheel housing, inspect the front face of the flywheel housing and the rear face of the cylinder block. The components must be free of the following substances: oil, fuel, water, gasket adhesive, assembly compounds, and any other foreign materials. | |||
| 1 | 4 | 9X-8875 Bolt | Length of 1/2 inch diameter bolt is Torque to |
| 2 | 6 | 9X-8873 Bolt | Length of 1/2 inch diameter bolt is Torque to |
| 3 | 2 | 9S-1374 Bolt | Length of 1/2 inch diameter bolt is Torque to |
| 4 | 4 | 8S-9089 Bolt | Length of 1/2 inch diameter bolt is Torque to |
| 5 | 16 | 1D-4590 Bolt | Length of 5/8 inch diameter bolt is Torque to |
Caterpillar Information System:
2013/11/25 New Breather Assemblies Are Now Used on Certain C175 Engines {1317}
2013/08/30 New Software and Low Pressure Fuel System Are Used in Certain C175 Engines {1250, 1901, 1902}
UPS 750 Uninterruptible Power Supply DC Bus Capacitor - Replace
3516C Marine Engines Engine Oil Lines
C13 Generator Set Engine Fan - Remove and Install
C3.4B Industrial Engine Fuel Related Components in Cold Weather
3516C Marine Engines Water Lines
2013/07/30 New Service Replacement Stator Part Numbers for Certain XQ60, XQ100, and XQ175 Generator Sets are Now Available {4453}
2015/08/19 An Improved Seat Belt Group is Now Available for 311 through 390 Excavators {7327}
C27 and C32 Generator Sets Product Description
371-0351 Hydraulic Valve Seat Puller Group {0374, 0599, 0700, 0703} 371-0351 Hydraulic Valve Seat Puller Group {0374, 0599, 0700, 0703}
C7.1 Engines Fuel Pressure Sensor - Remove and Install
C175-20 Locomotive Engine Fuel System Operation
3512E Engines for Well Stimulation Pumps Auxiliary Drive Shaft
2013/08/09 New Software Is Used on Certain 3500 Petroleum Engines {1901, 1920}
3512C Petroleum Engines Engine Oil Pressure Sensor - Remove and Install
2013/08/06 Improved Clamps are Now Used for the Cooling Lines Group on Certain Excavators {1351}
C13, C15, and C18 Generator Set Engines Piston and Rings
3512C Petroleum Engines Engine Speed/Timing Sensor - Remove and Install
2013/08/06 A New Upgraded Starter Is Used for Certain 3512, 3512B, 3512B HD, and 3512CEngines {1453}
2015/05/29 Improved Camshafts Are Now Used on Certain C15 and C18 Machine Engines {1210}
2013/08/15 Improved Camshafts Are Now Used on Certain C15 and C18 Engines {1210}
C7.1 Engines Diesel Particulate Filter Temperature Is Low
C13 Generator Set Engine Alternator - Remove and Install