2013/11/25 Caterpillar


New Breather Assemblies Are Now Used on Certain C175 Engines {1317}

Usage:

C175-20 BXR
Generator Set:
C175-16 (S/N: WYB1-UP)
Engine:
C175-16 (S/N: M6A1-UP; M6B1-UP; WYC1-UP; P6L1-UP; R1X1-UP)
C175-20 (S/N: BXR1-UP)
Engine News SEBD9913, 25 November 2013, "New Breather Assemblies Are Now Used on Certain C175 Engines". The original article has been revised to update the effective serial numbers.

Description of Change: The new breather assemblies and gaskets provide a better seal.

Adaptable To: The new 388-3276 Breather As and 439-5502 Gasket replace the 276-2724 Breather As .

The new 388-3276 Breather As and 439-5502 Gasket replace the 276-2724 Breather As are adaptable to the above engines back to first production.

The new parts required are listed in Table 2.

Table 1
Qty     Part    
8     9X-8268 Washer    
4     383-6310 Clamp  (1)    
2     388-3276 Breather As    
2     439-5502 Gasket    
( 1 ) Tighten the clamp bolts to 124 N·m (91 lb ft).
The effective serial numbers are listed in Table 2.

Table 2
Effective Serial Numbers    
S/N:M6A01008-UP    
S/N:M6B01005-UP    
S/N:P6L01041-UP    
S/N:R1X00114-UP    
S/N:WYB01470-UP    
S/N:WYC01002-UP    
S/N:BXR01034-UP    

Caterpillar Information System:

2013/08/30 New Software and Low Pressure Fuel System Are Used in Certain C175 Engines {1250, 1901, 1902}
UPS 750 Uninterruptible Power Supply DC Bus Capacitor - Replace
3516C Marine Engines Engine Oil Lines
C13 Generator Set Engine Fan - Remove and Install
C3.4B Industrial Engine Fuel Related Components in Cold Weather
3516C Marine Engines Water Lines
2013/07/30 New Service Replacement Stator Part Numbers for Certain XQ60, XQ100, and XQ175 Generator Sets are Now Available {4453}
2015/08/19 An Improved Seat Belt Group is Now Available for 311 through 390 Excavators {7327}
C27 and C32 Generator Sets Product Description
371-0351 Hydraulic Valve Seat Puller Group {0374, 0599, 0700, 0703} 371-0351 Hydraulic Valve Seat Puller Group {0374, 0599, 0700, 0703}
C7.1 Engines Fuel Pressure Sensor - Remove and Install
C13 Generator Set Engine Fan Drive - Assemble
3516C Petroleum Engines Flywheel Housing
C175-20 Locomotive Engine Fuel System Operation
3512E Engines for Well Stimulation Pumps Auxiliary Drive Shaft
2013/08/09 New Software Is Used on Certain 3500 Petroleum Engines {1901, 1920}
3512C Petroleum Engines Engine Oil Pressure Sensor - Remove and Install
2013/08/06 Improved Clamps are Now Used for the Cooling Lines Group on Certain Excavators {1351}
C13, C15, and C18 Generator Set Engines Piston and Rings
3512C Petroleum Engines Engine Speed/Timing Sensor - Remove and Install
2013/08/06 A New Upgraded Starter Is Used for Certain 3512, 3512B, 3512B HD, and 3512CEngines {1453}
2015/05/29 Improved Camshafts Are Now Used on Certain C15 and C18 Machine Engines {1210}
2013/08/15 Improved Camshafts Are Now Used on Certain C15 and C18 Engines {1210}
C7.1 Engines Diesel Particulate Filter Temperature Is Low
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.