C13, C15, and C18 Tier 4 Final Engines Caterpillar


Alternator and Regulator

Usage:

826K 232


图 1g03404365

表 1
366-2756 充电交流发电机总成的技术规格 
项目  数量  零件  技术规格说明 
最终安装扭矩为 100 ± 5 N·m (74 ± 4 lb ft)。 
最终安装扭矩至 4 ± 1 N·m (35 ± 9 lb in)。 
最终安装扭矩至 6 ± 1 N·m (53 ± 9 lb in)。 
最终安装扭矩至 15 ± 3 N·m (133 ± 27 lb in)。 
电压为 24 V。 
从皮带轮望去的旋转方向为顺时针方向。 
5000 rpm 时的最小满载电流为 115 安培。 
2000 rpm 时的最小满载电流为 65 安培。 
最大起动转速为 2000 rpm。 
输出电压为 28 ± 1 V。 

Caterpillar Information System:

Diagnostic Code Information for Caterpillar ® Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610} Diagnostic Code Information for Caterpillar ® Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
XQ570 Rental Generator Set ARD Spark Plug - Clean
C13 Industrial Engine Diesel Exhaust Fluid - Fill
2013/07/11 Special Instructions Are Available for Retrofitting the Dynamic Gas Blending Kits on Certain 3512C Engines {1000, 1250}
C280 Marine, Marine Auxiliary, and Petroleum Engines Before Starting Engine
390F MHPU Mobile Hydraulic Power Unit Window Washer Reservoir - Fill
390F MHPU Mobile Hydraulic Power Unit Stopping the Machine
C7.1 Marine Generator Set Engine Rating Conditions
C13 Industrial Engine Fire Prevention and Explosion Prevention
2014/09/16 Updated Flash Procedure for All Caterpillar Products {1920, 7610, 7620}
C280 Marine, Marine Auxiliary, and Petroleum Engines Product Lifting
390F MHPU Mobile Hydraulic Power Unit Swing Drive Oil Level - Check
C4.4 Industrial Engine High Pressure Fuel Lines
C4.4 Industrial Engine Electrical System
3500B and 3500 Marine Propulsion Engines with EUI Option Maintenance Interval Schedule
C13, C15, and C18 Tier 4 Final Engines Electronic Control (Diesel Exhaust Fluid)
C7.1 Industrial Engine Diesel Exhaust Fluid Tank
C4.4 Industrial Engine Product Description
C7.1 Industrial Engine Diesel Exhaust Fluid Pump
C7.1 Industrial Engine Manifold (Diesel Exhaust Fluid)
2013/11/21 A New Fastener Kit Is Used on the Pre-Lubrication Oil Pump Group of Certain G3500 and G3600 Engines {1319, 7553}
2013/08/15 A New Water Lines Group Is Used on G3508B Petroleum Engines {1355, 1380, 1393}
C7.1 Marine Generator Set Aftercooler Core - Inspect
C4.4 Industrial Engine Plate Locations and Film Locations
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.