390F MHPU Mobile Hydraulic Power Unit Caterpillar


Swing Drive Oil Level - Check

Usage:

390F B37
Pagrieziena pievada eļļas mērstienis atrodas uz pagrieziena pievada pie izlices pamatnes.

    Piezīme Ir divi pagrieziena pievadi, kas atrodas zem izlices pamatnes. Veiciet to pašu procedūru abiem izlices snieguma mehānisma pievadiem.



    Attēls 1g01137327


    Attēls 2g01137328

  1. Izņemiet mērstieni.


    Attēls 3g03403865

    Piezīme Informāciju attiecībā uz šķidrumu izšļakstīšanos skatiet Ekspluatācijas un apkopes rokasgrāmatāVispārīga informācija par bīstamīb, "u".

  2. Pārbaudiet mērstieni. Uzturiet eļļas līmeni līdz atzīmei "Full (Pilns)" uz mērstieņa. Ja nepieciešams, papildiniet eļļu pa mērstieņa caurulīti.

  3. Ielieciet mērstieni.

  4. Atkal pārbaudiet mērstieni.

  5. Ielieciet mērstieni atpakaļ.

Caterpillar Information System:

Configuring the Touchscreen IP Addresses on Certain Uninterruptible Power Supply (UPS) Models{7451} Configuring the Touchscreen IP Addresses on Certain Uninterruptible Power Supply (UPS) Models{7451}
3516C Petroleum Engines Vibration Damper - Remove and Install
390F MHPU Mobile Hydraulic Power Unit Swing Drive Oil - Change
390F Excavator Adjustable Gauge Undercarriage Frame
3512E Petroleum Engines Engine Oil Pan - Assemble
3512C HD and 3516C HD Class I Division 2 Hazardous Location Generator Sets Fluid Recommendations
434-2470 Major Engine Overhaul Foundational Kit for 3406B and 3406C Marine Engines{1000} 434-2470 Major Engine Overhaul Foundational Kit for 3406B and 3406C Marine Engines{1000}
374F and 390F Excavators and 390F MHPU Mobile Hydraulic Power Unit System Schematic
390F MHPU Mobile Hydraulic Power Unit Battery Disconnect Switch
Procedure for Replacing the 339-3161 Water Lines Group on G3508B Engines {1355, 1380, 1393} Procedure for Replacing the 339-3161 Water Lines Group on G3508B Engines {1355, 1380, 1393}
C280 Marine, Marine Auxiliary, and Petroleum Engines Control Panel
3512E Petroleum Engines Engine Oil Pan - Disassemble
C280 Marine, Marine Auxiliary, and Petroleum Engines Product Lifting
2014/09/16 Updated Flash Procedure for All Caterpillar Products {1920, 7610, 7620}
C13 Industrial Engine Fire Prevention and Explosion Prevention
C7.1 Marine Generator Set Engine Rating Conditions
390F MHPU Mobile Hydraulic Power Unit Stopping the Machine
390F MHPU Mobile Hydraulic Power Unit Window Washer Reservoir - Fill
C280 Marine, Marine Auxiliary, and Petroleum Engines Before Starting Engine
2013/07/11 Special Instructions Are Available for Retrofitting the Dynamic Gas Blending Kits on Certain 3512C Engines {1000, 1250}
C13 Industrial Engine Diesel Exhaust Fluid - Fill
XQ570 Rental Generator Set ARD Spark Plug - Clean
Diagnostic Code Information for Caterpillar ® Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610} Diagnostic Code Information for Caterpillar ® Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
C13, C15, and C18 Tier 4 Final Engines Alternator and Regulator
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.