A New Heavy-Duty Aftercooler is Available for Certain C32 Commercial Marine Engines Operating in Seawater {1063}
- Generator Set:
- C32 MAR GS ENG (S/N: RNE1-UP; RNX1-UP)
- Marine Engine:
- C32 MARINE (S/N: RND1-UP; RNY1-UP)
- C32 MARINE GS (S/N: RNF1-UP)
Description of Change: A new heavy-duty aftercooler core is available as a service replacement on commercial C32 marine engines operating in seawater. The new heavy-duty core is more durable and less likely to develop corrosion-erosion caused by debris in the seawater circuit.
Adaptable To: The new 399-6239 Heavy-duty Aftercooler Core As is a service replacement option for the existing 307-4581 Aftercooler Core As. Both cores are available for order through Morton service parts.
The following system requirements apply to both the new 399-6239 Heavy-duty Aftercooler Core As and the existing 307-4581 Aftercooler Core As :
- The existing cleaning and replacement service intervals called out in the C32 Marine Manuals:
- Operation and Maintenance Manual, SEBU7782
- Operation and Maintenance Manual, SEBU7793
- Operation and Maintenance Manual, SEBU8442
- Operation and Maintenance Manual, SEBU7782
- Seawater strainers must be used and have a media size of 2 mm (0.079 inch) or less per A&I, LEBW4978, "Cooling Systems". 1.6 mm (0.063 inch) media is strongly recommended in applications that are exposed to grass or debris.
Caterpillar Information System:
3516B and 3516C Engines For MT4400D AC Off-Highway Trucks Electronic Service Tools
G3512H and G3516H Generator Set Engines Pistons and Connecting Rods - Remove and Install
3500 Engines Camshaft
C9.3 Tier 4 Final Engines Cylinder Block Cover Group
C13, C15, and C18 Tier 4 Final Engines Manifold (Diesel Exhaust Fluid)
C4.4 and C7.1 Engines Injector Solenoid - Test
G3512H and G3516H Generator Set Engines Crankshaft Main Bearings - Remove and Install
C280 Marine Engines Engine Governing - Adjust
G3512H and G3516H Generator Set Engines Gear Group (Rear) - Remove and Install
G3512H and G3516H Generator Set Engines Flywheel Housing - Remove and Install
G3512H and G3516H Generator Set Engines Crankshaft Rear Seal and Wear Sleeve - Remove and Install
G3512H and G3516H Generator Set Engines Crankshaft Front Seal and Wear Sleeve - Remove and Install
G3512H and G3516H Generator Set Engines Cylinder Liner - Remove and Install
3512B and 3512C Petroleum Generator Set Engines Air Cleaner
G3512H and G3516H Generator Set Engines Camshaft - Remove and Install
Bench Test Procedure for a CX48-P2300 Transmission {0599, 0717, 3003, 3030, 3101, 3159} Bench Test Procedure for a CX48-P2300 Transmission {0599, 0717, 3003, 3030, 3101, 3159}
3500 Engines Exhaust Elbow
2013/04/25 Clarification Of The Service Interval For The Connecting Rod Bearings For Certain C175-16 Marine Engines {1219}
G3512H and G3516H Generator Set Engines Crankshaft - Remove and Install
G3512H and G3516H Generator Set Engines Prelubrication Oil Pump - Remove and Install
G3512H and G3516H Generator Set Engines Engine Oil Pump - Remove and Install
G3512H and G3516H Generator Set Engines Housing (Front) - Remove and Install
C13 Tier 4 Final Engines Exhaust Lines
G3500 A3 Engines Turbocharger