Exhaust Elbow
Show/hide table
Illustration 1 | g03371687 |
Show/hide table
Specification for 416-6731 Exhaust Elbow Gp | |||
Item | Qty | Part | Specification Description |
1 | 2 | 247-3393 Clamp As | Use the following procedure in order to tighten the clamp assembly: 1. Before assembly, lubricate the threads, the bearing surfaces, and inside diameter of the clamp assembly with Loctite C5A Copper Anti-Seize. 2. Tighten the clamp assembly to 3. Gently tap all around the clamp assembly with soft hammer. 4. Again, tighten the clamp assembly to |
2 | 12 | 9L-2295 High Temperature Bolt | Before assembly, lubricate the threads and the bearing surfaces with Loctite C5A Copper Anti-Seize. |
3 | 4 | 7L-6443 High Temperature Bolt | Before assembly, lubricate the threads and the bearing surfaces with Loctite C5A Copper Anti-Seize. |
Caterpillar Information System:
Bench Test Procedure for a CX48-P2300 Transmission {0599, 0717, 3003, 3030, 3101, 3159} Bench Test Procedure for a CX48-P2300 Transmission {0599, 0717, 3003, 3030, 3101, 3159}
G3512H and G3516H Generator Set Engines Camshaft - Remove and Install
3512B and 3512C Petroleum Generator Set Engines Air Cleaner
G3512H and G3516H Generator Set Engines Cylinder Liner - Remove and Install
2013/11/25 A New Heavy-Duty Aftercooler is Available for Certain C32 Commercial Marine Engines Operating in Seawater {1063}
3516B and 3516C Engines For MT4400D AC Off-Highway Trucks Electronic Service Tools
G3512H and G3516H Generator Set Engines Pistons and Connecting Rods - Remove and Install
3500 Engines Camshaft
C9.3 Tier 4 Final Engines Cylinder Block Cover Group
C13, C15, and C18 Tier 4 Final Engines Manifold (Diesel Exhaust Fluid)
C4.4 and C7.1 Engines Injector Solenoid - Test
G3512H and G3516H Generator Set Engines Crankshaft Main Bearings - Remove and Install
2013/04/25 Clarification Of The Service Interval For The Connecting Rod Bearings For Certain C175-16 Marine Engines {1219}
G3512H and G3516H Generator Set Engines Crankshaft - Remove and Install
G3512H and G3516H Generator Set Engines Prelubrication Oil Pump - Remove and Install
G3512H and G3516H Generator Set Engines Engine Oil Pump - Remove and Install
G3512H and G3516H Generator Set Engines Housing (Front) - Remove and Install
C13 Tier 4 Final Engines Exhaust Lines
G3500 A3 Engines Turbocharger
G3500B Engines Turbocharger
G3500 A3 Engines Camshaft
C13, C15, and C18 Tier 4 Final Engines Diesel Particulate Filter
G3500 A3 Engines Prelube Pump
G3500 A3 Engines Balancer Group (Front)