Undersized Crankshaft And Bearings Available For 3176 Truck Engines
Usage:
Caterpillar Information System:
1991/05/01 Inlet Air Temperature Sensor Added And Fuel Pressure Sensor Removed From Engine Control System
1991/05/01 Replacing A 3176 (2YG) Truck Engine With A 1991 3176 (7LG) Truck Engine
1991/05/01 Component Changes For 1991 Model 3176 (7LG, 43Z) Engines{1052,1087,1119,1215,1290,1292,1304,1361,1362,1378,1408,1901,1902,1912}
1991/04/01 Simplified Battery Test Procedure SEHS7633-02 And Battery Test Sheet SEHS9326 Available
1991/04/01 Correct Position Of Lockwashers For Electrical Components With Screw Terminals
1991/04/01 New Performance Category For Engine Crankcase Oil
1991/04/01 Procedure For Applying 1U8846 Gasket Maker
1991/04/01 Two Different Air Inlet Heater Control Modules Available
1991/04/01 New Shaft Bracket And Oil Supply Plug Used In Rocker Valve Shaft Assembly
1991/04/01 New Diagnostic Code 28 "Check Throttle Sensor Adjustment " Is On 1991 Engines
1991/04/01 Fuel Injection Pump Bushing Torque Increased
1991/03/01 List of Service Publications{0374,0375}
1991/05/01 Procedure To Retain Oil Pump When The Cylinder Block Pump Mounting Pad Is Broken
1991/05/01 New Drain Plug And O-ring Seal Used In Oil Pan Groups
1991/05/01 Smaller Connecting Rod Bolt Used In 4W6425 Air Compressor; Use Correct Torque
1991/05/01 Larger O-ring Seal Available For Oil Supply Port In Governor Housing
1991/05/01 Oversize Main Bearings Used In Remanufactured Engines Are Also Available For Parts Service
1991/06/01 Personality Modules For 1991
1991/06/01 New Seal And Improved Plate Eliminate Leaks In Brakesaver Water Lines Group
1991/06/01 1,1,1-Trichloroethane May Damage Deutsch C-E Electrical Connectors
1991/06/01 Maintenance Wall Chart Available For 3406B Truck Engines
1991/06/01 List Of Service Publications
1991/07/01 Correct Adjustments And Installation Procedure For Engine Speed Timing Sensor
1991/07/01 New Dual Service Program Module (SPM) Available