1991/06/01 Caterpillar


1,1,1-Trichloroethane May Damage Deutsch C-E Electrical Connectors

Usage:


The use of any solvent containing 1,1,1-Trichloroethane or other chlorinated solvent, such as 8T9011 or 4C4079 Cleaner Solvent, may damage some electrical connectors. The solvent can weaken or crack the nonmetallic parts of the connectors. This can result in either of the following.

- The lock fingers may not retain the pins or sockets, and may pull out of the connector.
- The nonmetallic body (insulator) may break into pieces.

The only approved cleaner for electrical connectors is isopropyl (rubbing) alcohol or dry compressed air.

Caterpillar Information System:

1991/06/01 New Seal And Improved Plate Eliminate Leaks In Brakesaver Water Lines Group
1991/06/01 Personality Modules For 1991
1991/05/01 Oversize Main Bearings Used In Remanufactured Engines Are Also Available For Parts Service
1991/05/01 Larger O-ring Seal Available For Oil Supply Port In Governor Housing
1991/05/01 Smaller Connecting Rod Bolt Used In 4W6425 Air Compressor; Use Correct Torque
1991/05/01 New Drain Plug And O-ring Seal Used In Oil Pan Groups
1991/05/01 Procedure To Retain Oil Pump When The Cylinder Block Pump Mounting Pad Is Broken
1991/05/01 Undersized Crankshaft And Bearings Available For 3176 Truck Engines
1991/05/01 Inlet Air Temperature Sensor Added And Fuel Pressure Sensor Removed From Engine Control System
1991/05/01 Replacing A 3176 (2YG) Truck Engine With A 1991 3176 (7LG) Truck Engine
1991/05/01 Component Changes For 1991 Model 3176 (7LG, 43Z) Engines{1052,1087,1119,1215,1290,1292,1304,1361,1362,1378,1408,1901,1902,1912}
1991/04/01 Simplified Battery Test Procedure SEHS7633-02 And Battery Test Sheet SEHS9326 Available
1991/06/01 Maintenance Wall Chart Available For 3406B Truck Engines
1991/06/01 List Of Service Publications
1991/07/01 Correct Adjustments And Installation Procedure For Engine Speed Timing Sensor
1991/07/01 New Dual Service Program Module (SPM) Available
1991/07/01 Full Load Setting (FLS) And Full Torque Setting (FTS) Should Be Correctly Programmed
1991/07/01 New Crankshaft Seal Groups Provide Increased Protection From Dirt And Dust
1991/07/01 New Exhaust Manifold Gasket Available
1991/07/01 Dowel Hole Removed From 8N3946 Governor Housing Improves Service Life
1991/08/01 Service Tips For Turbocharger Removal And Installation
1991/08/01 Service Tips For Cleaning Air-to-air Aftercooling Systems
1991/08/01 California Laws Target Excessive Smoke
1991/08/01 Fuel Nozzle Orifice Erosion
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.