Turbocharger
Show/hide table
Illustration 1 | g03333817 |
Typical example |
Show/hide table
Specification for 379-5339 Turbocharger Gp, 379-5344 Turbocharger Gp, and 344-9615 Turbocharger Gp | |||
Item | Qty | Part | Specification Description |
1 | 24 | 293-5490 Bolt | Before assembly, lubricate the threads with Loctite C5Acopper anti-seize.
Torque to |
2 | 2 | 372-5858 Band Clamp | Use the following procedure in order to tighten the nut of the band clamp: |
Lubricate the threads with Loctite C5Acopper anti-seize.
1. Tighten the band clamp approximately to 2. Gently hit around the band clamp with a soft hammer. 3. Again, tighten the band clamp to 4. Again, gently hit around the clamp assembly with a soft hammer. 5. Again, tighten the band clamp to |
Caterpillar Information System:
3500 Engines Fuel Injector
3500 Engines for Caterpillar Built Generator Sets Turbocharger
3500 Engines Engine Oil Pan
3500 Industrial Engines Turbocharger
3500C Marine Engines Camshaft
3500C Marine Engines Exhaust Manifold
3500C Marine Engines Camshaft
3500C Marine Engines Exhaust Manifold
3500C Marine Engines Camshaft
3500C Marine Engines Camshaft
2013/02/20 An Improved Thermostat Is Used for Certain 3500 Marine Engines {1355}
2013/02/20 New Oil Mist Detectors Are Available for Certain 3516 Marine Engines {1336}
3500C Marine Engines Engine Oil Pan
3500 Engines Engine Oil Pan
3512B and 3516B Engines Fuel Filter Housing - Remove
3500C Marine Engines Gear Group (Rear)
3500 Engines Engine Oil Pan
374F Excavator Operator Controls
3512B and 3516B Engines Fuel Filter Housing - Install
2012/12/20 A New Oil Level Gauge Is Now Used On Certain C18 Industrial Engines {1326}
2013/01/03 A New Fuel Metering Valve Is Now Used for Certain G3500 Engines {1270}
3512B and 3516B Engines Engine Speed/Timing Sensor - Remove and Install
3512B and 3516B Engines Engine Oil Pressure Sensor - Remove and Install
3512B and 3516B Engines Coolant Level Sensor - Remove and Install