Fuel Filter Housing - Install
安装步骤
Show/hide table
注意 |
---|
保持所有零件清洁无杂质。 杂质会造成快速磨损和缩短部件寿命。 |
- 将适当的起吊设备连在燃油滤清器壳体 (8) 上。 燃油滤清器壳体 (8) 的重量约为 30 kg (66 lb)。 安装燃油滤清器壳体 (8) 。
Show/hide table
图 1 | g03333923 |
- 连接管组件 (7) 。
- 安装防护罩组件 (5) 和 17 螺栓 (4) 。
Show/hide table
图 2 | g03333882 |
- 连接线束组件 (1) 、管组件 (3) ,并拆下管组件 (2) 。
Show/hide table
图 3 | g03333852 |
Caterpillar Information System:
374F Excavator Operator Controls
3500 Engines Engine Oil Pan
3500C Marine Engines Gear Group (Rear)
3512B and 3516B Engines Fuel Filter Housing - Remove
3500 Engines Engine Oil Pan
3500C Marine Engines Engine Oil Pan
3500C Marine Engines Turbocharger
3500 Engines Fuel Injector
3500 Engines for Caterpillar Built Generator Sets Turbocharger
3500 Engines Engine Oil Pan
3500 Industrial Engines Turbocharger
3500C Marine Engines Camshaft
2012/12/20 A New Oil Level Gauge Is Now Used On Certain C18 Industrial Engines {1326}
2013/01/03 A New Fuel Metering Valve Is Now Used for Certain G3500 Engines {1270}
3512B and 3516B Engines Engine Speed/Timing Sensor - Remove and Install
3512B and 3516B Engines Engine Oil Pressure Sensor - Remove and Install
3512B and 3516B Engines Coolant Level Sensor - Remove and Install
3512B and 3516B Engines Radiator Group - Remove
3512B and 3516B Engines Radiator Group - Install
2012/12/21 The Primer Color Has Changed for All C15 and C18 Machine Engine Blocks {1201, 7559}
2012/12/21 The Primer Color Has Changed for All C15 and C18 Commercial Engine Blocks {1201, 7559}
2012/12/21 The Primer Color Has Changed for All C15 and C18 Truck Engine Blocks {1201, 7559}
3512B and 3516B Engines Engine Oil Cooler - Remove
2013/06/17 An Improved Shaft Seal on the Cooling Fan Drive Group is Now Available on Certain Excavators and Mobile Hydraulic Power Units {1359}