An Improved Shaft Seal on the Cooling Fan Drive Group is Now Available on Certain Excavators and Mobile Hydraulic Power Units {1359}
- Excavator:
- 345D (S/N: DPA1-UP; BYC1-UP; HLC1-UP; RGD1-UP; RAE1-UP; YEE1-UP; NEG1-UP; RGG1-UP; EEH1-UP; KFH1-UP; RAJ1-UP; MLK1-UP; NLM1-UP; JKN1-UP; L5R1-UP; FES1-UP; PBT1-UP; BYW1-UP; LKY1-UP)
- Mobile Hydraulic Power Unit:
- 345D MHPU (S/N: P5D1-UP)
- 349D (S/N: JGB1-UP; WTD1-UP; GKF1-UP; NNF1-UP; PZG1-UP; KLH1-UP; RBJ1-UP; MEN1-UP; KHS1-UP)
- 374D (S/N: PJA1-UP; PAP1-UP; PAS1-UP; PAX1-UP)
- 390D (S/N: WAG1-UP; BYP1-UP; WAP1-UP; WBT1-UP; KCZ1-UP)
- 349D MHPU (S/N: DKN1-UP)
- 365C MHPU (S/N: GSZ1-UP)
- 374D MHPU (S/N: JNZ1-UP)
- 390D MHPU (S/N: M1M1-UP)
The shaft seal for the cooling fan drive group has been improved with new seal material to provide longer service life than the former shaft seal. Refer to table 1.
Show/hide table
Parts List     | |||
Qty     | New Part Number     | Description     | Former Part Number     |
1     | 432-5830     | Seal-Lip Type     | 315-4367     |
Show/hide table
Illustration 1 | g03334566 |
Shaft Seal Location (1) Fan drive group (2) Shaft seal |
Show/hide table
Illustration 2 | g03334057 |
New Shaft Seal (3) Location of identification number |
The improved shaft seal can be identified by number XP01650-E0A shown on the seal body. Refer to illustration 2.
Show/hide table
Illustration 3 | g03334260 |
Fan Drive Group (4) Former fan drive group (5) Added groove (6) New fan drive group |
The fan drive group with the improved shaft seal can be identified by the groove around the drive case. Refer to illustration 3.
Caterpillar Information System:
3512B and 3516B Engines Engine Oil Cooler - Remove
2012/12/21 The Primer Color Has Changed for All C15 and C18 Truck Engine Blocks {1201, 7559}
2012/12/21 The Primer Color Has Changed for All C15 and C18 Commercial Engine Blocks {1201, 7559}
2012/12/21 The Primer Color Has Changed for All C15 and C18 Machine Engine Blocks {1201, 7559}
3512B and 3516B Engines Radiator Group - Install
3512B and 3516B Engines Radiator Group - Remove
3512B and 3516B Engines Coolant Level Sensor - Remove and Install
3512B and 3516B Engines Engine Oil Pressure Sensor - Remove and Install
3512B and 3516B Engines Engine Speed/Timing Sensor - Remove and Install
2013/01/03 A New Fuel Metering Valve Is Now Used for Certain G3500 Engines {1270}
2012/12/20 A New Oil Level Gauge Is Now Used On Certain C18 Industrial Engines {1326}
3512B and 3516B Engines Fuel Filter Housing - Install
G3500 Engines Safety Messages
3500C Marine Engines Auxiliary Water Pump
3500 Engines for Caterpillar Built Generator Sets Fan Drive
3500C Marine Engines Gear Group (Rear)
C1.5 and C2.2 Industrial Engines ARD Nozzle - Test
3500C Marine Engines Gear Group (Rear)
3500C Marine Engines Gear Group (Front) - Reverse Rotation
3500 Engines Flywheel Housing Cover
C7.1 Industrial Engine Engine Electronics
3500C Marine Engines Gear Group (Front) - Reverse Rotation
3500 Engines for Caterpillar Built Generator Sets Crankcase Breather
3500 Engines for Caterpillar Built Generator Sets Crankcase Breather