3500C Marine Engines Caterpillar

Gear Group (Rear)

Usage:

3512C BM2

Show/hide table




Illustration 1	g03334111

Show/hide table

Table 1
Specification for 382-4499 Rear Gear Gp
Item	Qty	Part	Specification Description
1	2	261-3139 Idler Gear As	Before assembly, clean the taper of the camshaft and the tapered bore of the camshaft drive gear with lint free cloth saturated with cleaning solvent to remove excess oil. clean with alcohol wipe.
2	2	261-3137 Idler Gear As	After installation, bore of 125-9751 Bushing is 81.060 ± 0.010 mm (3.1913 ± 0.0004 inch). Installation depth of the bushing is 1.00 ± 0.25 mm (0.039 ± 0.009 inch).
3	1	261-3133 Idler Gear As	After installation, bore of 101-1372 Bushing is 75.060 ± 0.010 mm (2.9551 ± 0.0004 inch). Installation depth of the bushing is 1.50 ± 0.50 mm (0.059 ± 0.019 inch).
4	2	101-1368 Thrust Washer	Thickness is 1.90 ± 0.10 mm (0.074 ± 0.004 inch).
5	1	101-1366 Gear Shaft	Diameter is 74.990 ± 0.010 mm (2.9524 ± 0.0004 inch).
6	4	8M-2530 Bolt	Torque to 140 ± 10 N·m (103 ± 7 lb ft).

Show/hide table




Illustration 2	g03334114
Rear view

Show/hide table

Table 2
Specification for 382-4499 Rear Gear Gp
Item	Qty	Part	Specification Description
7	4	1B-4367 Bolt	Torque to 240 ± 20 N·m (177 ± 15 lb ft).
8	2	8S-2331 Bolt	Torque to 240 ± 20 N·m (177 ± 15 lb ft).
9	2	101-1367 Idler Shaft	Diameter is 81.000 ± 0.010 mm (3.1889 ± 0.0004 inch).
10	1	101-1365 Thrust Plate	Thickness is 6.35 ± 0.25 mm (0.250 ± 0.010 inch).

Caterpillar Information System:

3500 Engines for Caterpillar Built Generator Sets Fan Drive

3500C Marine Engines Auxiliary Water Pump

G3500 Engines Safety Messages

2013/06/17 An Improved Shaft Seal on the Cooling Fan Drive Group is Now Available on Certain Excavators and Mobile Hydraulic Power Units {1359}

3512B and 3516B Engines Engine Oil Cooler - Remove

2012/12/21 The Primer Color Has Changed for All C15 and C18 Truck Engine Blocks {1201, 7559}

2012/12/21 The Primer Color Has Changed for All C15 and C18 Commercial Engine Blocks {1201, 7559}

2012/12/21 The Primer Color Has Changed for All C15 and C18 Machine Engine Blocks {1201, 7559}

3512B and 3516B Engines Radiator Group - Install

3512B and 3516B Engines Radiator Group - Remove

3512B and 3516B Engines Coolant Level Sensor - Remove and Install

3512B and 3516B Engines Engine Oil Pressure Sensor - Remove and Install

C1.5 and C2.2 Industrial Engines ARD Nozzle - Test

3500C Marine Engines Gear Group (Rear)

3500C Marine Engines Gear Group (Front) - Reverse Rotation

3500 Engines Flywheel Housing Cover

C7.1 Industrial Engine Engine Electronics

3500C Marine Engines Gear Group (Front) - Reverse Rotation

3500 Engines for Caterpillar Built Generator Sets Crankcase Breather

3500 Engines for Caterpillar Built Generator Sets Crankcase Breather

3500 Engines for Caterpillar Built Generator Sets Radiator

3500C Marine Engines Accessory Drive (Lower Left Hand, Reverse Rotation)

3500 Industrial Engines Cylinder Block

390F Excavator Plate Locations and Film Locations