Turbocharger
Show/hide table
| |
| Illustration 1 | g03333802 |
Show/hide table
| Specification for 379-5357 Turbocharger Gp | |||
| Item | Qty | Part | Specification Description |
| 1 | 2 | 7W-2297 Clamp As | Use the following procedure in order to tighten the clamp and clamp assembly:
1. Tighten clamp assemblies to 2. Gently tap around the clamp assemblies with a soft faced hammer. 3. Again, tighten clamp assemblies to |
| 2 | 4 | 7E-8516 Clamp | |
| 3 | 16 | 6V-2751 High Temperature Bolt | Torque to Close ends of lock plates one time only after final engine assembly and replace opened lock plates. |
| 4 | 8 | 2N-2765 High Temperature Bolt | Before assembly, lubricate the threads and the bearing surfaces with Loctite C5A Copper Anti-Seize. |
| 5 | 8 | 2N-2766 Locknut | Torque to |
| 6 | 2 | 123-6979 V-Band Clamp | Use the following procedure in order to tighten the clamps on the bellows assembly:
1. Tighten clamps to 2. Gently tap around the clamps with a soft faced hammer. 3. Again, tighten clamps to |
Caterpillar Information System:
3500 Engines Engine Oil Pan
3500 Industrial Engines Turbocharger
3500C Marine Engines Camshaft
3500C Marine Engines Exhaust Manifold
3500C Marine Engines Camshaft
3500C Marine Engines Exhaust Manifold
3500C Marine Engines Camshaft
3500C Marine Engines Camshaft
2013/02/20 An Improved Thermostat Is Used for Certain 3500 Marine Engines {1355}
2013/02/20 New Oil Mist Detectors Are Available for Certain 3516 Marine Engines {1336}
2013/03/01 New Suction Screen and Handle Are Used in 3500 Machine Engines {1302, 1302}
3512B SR4B Generator Sets Maintenance Interval Schedule - Standby
3500 Engines Fuel Injector
3500C Marine Engines Turbocharger
3500C Marine Engines Engine Oil Pan
3500 Engines Engine Oil Pan
3512B and 3516B Engines Fuel Filter Housing - Remove
3500C Marine Engines Gear Group (Rear)
3500 Engines Engine Oil Pan
374F Excavator Operator Controls
3512B and 3516B Engines Fuel Filter Housing - Install
2012/12/20 A New Oil Level Gauge Is Now Used On Certain C18 Industrial Engines {1326}
2013/01/03 A New Fuel Metering Valve Is Now Used for Certain G3500 Engines {1270}
3512B and 3516B Engines Engine Speed/Timing Sensor - Remove and Install