3500C Marine Engines Caterpillar


Exhaust Manifold

Usage:

3512C DPC


Illustration 1g03333794

Table 1
Specification for 385-0224 Exhaust Manifold Gp 
Item  Qty  Part  Specification description 
20  239-6808 Clamp  Before assembly, lubricate threads, bearing surfaces and inside diameter of clamps with Loctite C5A copper anti seize.
Torque to 12 ± 1 N·m (106 ± 9 lb in)
363-2057 Band Clamp  Tighten to 17 ± 2 N·m (150 ± 18 lb in).
Gently tap around the band clamp.
Again, tighten to 17 ± 2 N·m (150 ± 18 lb in)
364-5416 Bellows As  Ensure that the bellows are installed in the proper direction as marked on the bellows by an arrow. 
9L-2295 High Temperature Bolt  Before assembly, lubricate threads and bearing surfaces with Loctite C5A copper anti seize. 
241-2634 Clamp As  Tighten to 8 ± 1 N·m (71 ± 9 lb in).
Gently tap around the band clamp.
Again, tighten to 8 ± 1 N·m (71 ± 9 lb in)
48  9L-7373 High Temperature Bolt  Before assembly, lubricate threads and bearing surfaces with Loctite C5A copper anti seize.
Tighten to 55 ± 5 N·m (41 ± 4 lb ft).
Again, tighten to 55 ± 5 N·m (41 ± 4 lb ft)
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.