Engine Oil Pan
Show/hide table
| |
| 图 1 | g03333800 |
Show/hide table
| 技术规格 - 416-6696 油底壳总成 | |||
| 项目 | 数量 | 零件 | 技术规格说明 |
| 1 | 38 | 5P-5855 螺栓 | 装配后，根据需要在螺纹上涂抹绿色 Loctite 290。 |
| 2 | 1 | 7E-2630 油底壳垫片 | 装配前，根据需要在垫片接头上涂抹 Loctite 596 或 Permatex No. 2。 |
| 3 | 5 | 1A-2029 螺栓 | 按照以下步骤拧紧螺栓：
1. 将螺栓 (3) 上紧到标准扭矩。 2. 按照图 1 中所示的数字顺序拧紧螺栓 (4) 至标准扭矩。 |
| 4 | 10 | ||
| 5 | 1 | 142-4159 整体式密封件 | 装配前，根据需要在密封件接头上涂抹 Loctite 596 或 Permatex No. 2。 |
| 6 | 1 | 4B-2363 机油排放塞 | 拧紧至扭矩为 |
| 7 | 2 | 6V-4315 O 形密封圈 | 装配前，使用润滑剂稍微润滑即将密封的孔。 |
| 8 | 4 | 5P-5700 O 形密封圈 | 装配前，使用润滑剂稍微润滑即将密封的孔。 |
| 9 | 2 | 3P-0654 O 形密封圈 | 装配前，使用润滑剂稍微润滑即将密封的孔。 |
Caterpillar Information System:
3500 Industrial Engines Turbocharger
3500C Marine Engines Camshaft
3500C Marine Engines Exhaust Manifold
3500C Marine Engines Camshaft
3500C Marine Engines Exhaust Manifold
3500C Marine Engines Camshaft
3500C Marine Engines Camshaft
2013/02/20 An Improved Thermostat Is Used for Certain 3500 Marine Engines {1355}
2013/02/20 New Oil Mist Detectors Are Available for Certain 3516 Marine Engines {1336}
2013/03/01 New Suction Screen and Handle Are Used in 3500 Machine Engines {1302, 1302}
3512B SR4B Generator Sets Maintenance Interval Schedule - Standby
3512B SR4B Generator Sets Maintenance Interval Schedule - Prime
3500 Engines for Caterpillar Built Generator Sets Turbocharger
3500 Engines Fuel Injector
3500C Marine Engines Turbocharger
3500C Marine Engines Engine Oil Pan
3500 Engines Engine Oil Pan
3512B and 3516B Engines Fuel Filter Housing - Remove
3500C Marine Engines Gear Group (Rear)
3500 Engines Engine Oil Pan
374F Excavator Operator Controls
3512B and 3516B Engines Fuel Filter Housing - Install
2012/12/20 A New Oil Level Gauge Is Now Used On Certain C18 Industrial Engines {1326}
2013/01/03 A New Fuel Metering Valve Is Now Used for Certain G3500 Engines {1270}