3500 Engines Caterpillar

Fuel Injector

Usage:

3512C ED4

Show/hide table




图 1	g03333808
典型示例

Show/hide table

表 1
技术规格 - 383-4054 喷油泵总成和 383-4056 喷油泵总成
项目	数量	零件	技术规格说明
安装喷油器总成前，使用 1P-0808 多功能润滑脂润滑缸盖孔。用卡箍将喷油器压进孔中。不要轻敲喷油器顶部。
A	-	-	正时尺寸为 64.34 ± 0.20 mm (2.533 ± 0.008 inch)。
1	1	7F-8698 螺栓	拧紧至扭矩为 65 ± 7 N·m (48 ± 5 lb ft)。

Caterpillar Information System:

3500 Engines for Caterpillar Built Generator Sets Turbocharger

3500 Engines Engine Oil Pan

3500 Industrial Engines Turbocharger

3500C Marine Engines Camshaft

3500C Marine Engines Exhaust Manifold

3500C Marine Engines Camshaft

3500C Marine Engines Exhaust Manifold

3500C Marine Engines Camshaft

3500C Marine Engines Camshaft

2013/02/20 An Improved Thermostat Is Used for Certain 3500 Marine Engines {1355}

2013/02/20 New Oil Mist Detectors Are Available for Certain 3516 Marine Engines {1336}

2013/03/01 New Suction Screen and Handle Are Used in 3500 Machine Engines {1302, 1302}

3500C Marine Engines Turbocharger

3500C Marine Engines Engine Oil Pan

3500 Engines Engine Oil Pan

3512B and 3516B Engines Fuel Filter Housing - Remove

3500C Marine Engines Gear Group (Rear)

3500 Engines Engine Oil Pan

374F Excavator Operator Controls

3512B and 3516B Engines Fuel Filter Housing - Install

2012/12/20 A New Oil Level Gauge Is Now Used On Certain C18 Industrial Engines {1326}

2013/01/03 A New Fuel Metering Valve Is Now Used for Certain G3500 Engines {1270}

3512B and 3516B Engines Engine Speed/Timing Sensor - Remove and Install

3512B and 3516B Engines Engine Oil Pressure Sensor - Remove and Install