C175-16 Generator Set Engine Caterpillar

Removal Procedure

1. Turn the battery disconnect switch to the OFF position.

2. Turn the fuel supply valve to the OFF position.
   Show/hide table

   NOTICE
   Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products. Dispose of all fluids according to local regulations and mandates.

3. Drain the oil from the engine into a suitable container for storage or for disposal. Refer to Operation and Maintenance Manual, "Engine Oil and Filter - Change".
   Show/hide table

   Illustration 1	g01214538

4. Remove bolts (2) and bolts (3). Remove elbow (4) from engine oil pump (1).
   Show/hide table

   Illustration 2	g01559073

5. Disconnect hose assemblies (5) and (6) from fuel filter housing (7).
   Show/hide table

   Illustration 3	g01559133

6. Disconnect hose assemblies (8), (9), and (10).
   Show/hide table

   Illustration 4	g01559113

7. Disconnect harness assemblies (11) and (12).
   Show/hide table

   Illustration 5	g03277457

8. Remove bolts (13) and (14).
   Show/hide table

   Illustration 6	g01559153

9. Attach Tooling (C) onto the engine. The weight of the engine is approximately 10343 kg (22802 lb). Remove bolts (14) on all sides of engine oil pan (15).
   Show/hide table

   Illustration 7	g01559173

10. Raise the engine from engine oil pan (15).
    Show/hide table

    Illustration 8	g01559193

11. Position the engine on Tooling (A).
    Show/hide table

    Illustration 9	g01559213

12. Attach Tooling (B) and a suitable lifting device onto engine oil pan (15). The weight of engine oil pan (15) is approximately 567 kg (1250 lb). Apply slight lifting tension on engine oil pan (15). Reach through the holes in platform (16) in order to remove bolts (17). Remove engine oil pan (15) from platform (16).

Installation Procedure

1. Install engine oil pan (15) in the reverse order of removal.