3500B and 3500C Marine Engines Caterpillar


Exhaust Manifold

Usage:

3516B 9F2


Illustration 1g03113876

Table 1
Specification for 393-9363 Exhaust Manifold Gp 
Item  Qty  Part  Specification Description 
3B-1915 Bolt  Before assembly, apply Loctite C5A Copper Anti-Seize to threads and bearing surfaces. 
40  5P-2755 High Temperature Bolt  Before assembly, apply Loctite C5A Copper Anti-Seize to threads and bearing surfaces. 
Torque to 55 ± 5 N·m (41 ± 4 lb ft).
48  3B-1915 Bolt  Before assembly, apply Loctite C5A Copper Anti-Seize to threads and bearing surfaces. 
Torque to 50 ± 5 N·m (37 ± 4 lb ft).

Caterpillar Information System:

3512B and 3516B Engines Air Inlet and Exhaust Lines
3500 Industrial Engines Piston and Rings
3500B Generator Set Engines Engine Oil Lines
3500 Generator Set Engines Gear Group (Rear)
G3500 A3 Engines Camshaft Bearing Position
Installation of the 291-7758 Medium Pressure Wiring {1408} Installation of the 291-7758 Medium Pressure Wiring {1408}
3500 Engines for Caterpillar Built Generator Sets Flexible Coupling
3500B Engines for Caterpillar Built Power Modules Air Inlet and Exhaust Lines
C7.1 Industrial Engine Before Starting Engine
3500 Generator Set Engines Exhaust Manifold
3500B Generator Set Engines Auxiliary Water Pump - Sea Water
TH48-E80 Petroleum Transmission Selector and Pressure Control Valve (Transmission)
3500B Generator Set Engines Air Inlet and Exhaust Lines
3500B High Displacement Locomotive Engines Air Inlet and Exhaust Lines
Electrical Application and Installation Guide for Petroleum Transmissions{1400, 3030} Electrical Application and Installation Guide for Petroleum Transmissions{1400, 3030}
CX48-P2300 Petroleum Transmission Power Train Electronic Control System Electronic Control Module (ECM)
2012/07/31 Proper Care of the Two-Stage Air Cleaner for Certain 3512C Petroleum Engines {1051, 1054}
C18 Marine Engine Refill Capacities
C15 and C18 Engines for China On-Highway Phase IV Engine Valve Lash - Inspect/Adjust
CX48-P2300 Petroleum Transmission Power Train Electronic Control System System Schematic
C9.3 Tier 4 Final Engines Fuel System Pressure - Test
336F MHPU Mobile Hydraulic Power Unit Condenser (Refrigerant) - Clean
2012/08/21 Improved Aftercooler Lines Components are Available for Certain C280 and 3600 Engines {1063}
2012/09/11 Additional Requirements Are Required for Emission Compliance on Replacement Engines {1000, 775E}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.